Bosch DS7445i Guía de usuario Pagina 53
- Pagina / 54
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
DS7240/DS7220 User's Guide Copyright 2002 Detection Systems, Inc. P/N: 49211C Page 53
PART III: REFERENCE MATERIALS
13.0 Glossary
24-hour Zone Zones that are always on even when the system is turned off. Two types: Fire zones and Non-fire
24-hour zones.
All On To turn on all of the zones in the system.
Burglary Alarm
Tone
A constant tone.
Bypass To selectively remove zones temporarily from the system.
Central Station
A facility where trained personnel monitor your security system 24 hours a day. Your security
system may be programmed to contact the Central Station during alarm conditions, enabling
Central Station personnel to dispatch the proper authorities.
Controlled Zone Zone that reports alarm conditions only when the system is turned on.
DS-RPS
DS-RPS (Remote Programming Software) is a Windows
-based account management and panel
programming utility designed to remotely set up and program specific control panels.
Entry Delay A programmed delay of the system alarm responses that allow you to enter the building through
the entry door to turn your system off. An alarm response begins if you do not turn the system off
before Entry Delay expires. Your Security Company programs the Entry Delay time.
Error Tone The same tone as the Trouble tone, but not repeated.
Exit Delay A programmed delay of the system alarm responses that allow you to exit after turning the system
on. An alarm response begins if you exit the building after Exit Delay expires. Your Security
Company programs the Exit Delay time.
Faulted Zone A zone that is not normal. For example, an open door or window.
Fire Alarm Tone A tone that is on for one second, then briefly off (repeatedly).
Force Arming A method of overriding the safety feature that prevents arming with a faulted circuit on a
control/communicator.
Hold An instruction to press and hold a key to perform a function.
Instant Alarm A zone type that initiates an alarm immediately when faulted. This zone type does not follow any
Entry/Exit delay time.
Keyswitch A switch activated by a key.
No Entry Turning the system on without Entry delay.
Off Display The display that appears when the system is turned off and no keys are pressed.
Partial On To turn on part of the zones in the system. Partial On zones are determined by the user.
Perimeter Only To turn on part of the zones in the system. Perimeter Only zones are determined by the Security
Company.
Personal
Identification
Number (PIN)
A unique number that is assigned to each user that identifies him/her to the system. This number is
assigned an authority level that allows the user to carry out system functions such as turning the
system on and off.
Press/Push These are used interchangeably instructing you to push down and then release a key.
Restoral Report A signal transmitted upon the removal of a trouble or alarm condition from an alarm circuit.
Sked A scheduling parameter that allows a selected event to happen at a specific time.
Trouble A service condition that needs to be corrected, such as a broken wire.
Trouble Tone A tone that is on briefly, followed by a pause, on briefly (repeatedly).
Zone A detection device or group of devices connected to your security system.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i
(44 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch APC-AMC2-4WCF Manual de instalación
(62 paginas)
(62 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch AutoDome 600 Series Manual de usuario
(11 paginas)
(11 paginas)
(8 paginas)
(64 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales