Bosch EHP 6.5 AA Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
GB-6
1
Press the MODE button to select the
operation mode.
AUTO HEAT COOL DRY
2
Press the ON/OFF button to start
operation.
The red OPERATION lamp ( ) on the unit
will light.
3
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
The temperature can be changed up to 2°C
above or below the temperature automatically
determined by the air conditioner.
COOL/HEAT MODE
The temperature can be set within the range
of 18 to 32°C.
4
Press the FAN button to set the desired
fan speed.
AUTO SOFT LOW HIGH
In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5
To turn off the unit, press the ON/OFF
button again.
The red OPERATION lamp ( ) on the unit
will turn off.
BASIC OPERATION
(Example: 1°C higher)
(Example: 2°C lower)
2
5
3
1
4
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and
mode are automatically selected according to
the room temperature and outdoor temperature
when the unit is turned on.
During operation, if the outdoor temperature
changes, the temperature settings will auto-
matically slide as shown in the chart.
Modes and Temperature Settings
The gures in ( ) are temperature settings
EHP6.5_AA_multi_TINSEA825JBRZ.indd 6 2013/7/6 13:35:33
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 83 84

Comentarios a estos manuales

Sin comentarios