Bosch D9210C El manual del propietario descargar pdf (Pagina 15)

Part I: Security System Basics

Burglary Alarms

D1260 Owner’s Manual

Burglary Alarms

Burglary alarms are the second priority. When a burglary point activates while your system is armed, your command

center emits a steady high-pitched burglary tone. The tone sounds for the time set by your security company.

The command center display shows the number of burglary

points activated, the point text then idle text

If there is more than one point causing an alarm,

the display will show each point for three seconds

before showing the next one. When the last alarm

is shown, the next display is idle text followed by

the first alarm.

3 seconds

Silencing Burglary Alarms

Entering a personal passcode with the proper authority level silences a burglary alarm and disarms the system if it was

armed.

The system will now display *Alarm Silenced*

and then the number of points in alarm ### Alarms and the

custom text of all the points in alarm, in the order of occurrence.

Entering COMMAND 4 clears the scrolling point text from the display.

The *Alarm Silenced* message will continue to alternate with

idle text as a reminder that it is still possible to view the text of

the points in alarm by using the View Memory function. See

VIEW MEMORY ? (Command 40) for more information.

To clear the event memory and remove the *Alarm Silenced*

message from the display, press the Clear Display> soft key.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 153 154

Sin comentarios

Bosch D9210C El manual del propietario Pagina 15