Bosch D9210C Manual de usuario descargar pdf (Pagina 8)

GV4 Series Control Panel | Release Notes

8 Bosch Security Systems, Inc. | 11/11 | F01U261045-01

Keypads assigned to an area with the A# Two Man

Rule set to Yes must be configured for Area Wide

Scope (CC# Scope set to Area).

When the A# Two Man Rule set to Yes no keypads in

the system can be assigned to Panel Wide Scope (CC#

Scope must not be set to Panel Wide).

When the A# Two Man Rule set to Yes no keypads in

the system with Account Wide or Custom Scope (CC#

Scope set to Account or Custom) can include an area

with A# Two Man Rule set to Yes in their scope.

Set A# Early Ambush to No for areas with the A# Two

Man Rule set to Yes.

Failure to follow the additional configuration

requirements shown above will result in

unintended system behavior.

The D720 Keypad does not support the Two-

Man Rule feature.

The Two-Man Rule feature is not allowed for

use in SIA CP-01 compliant installations.

Consult the local authority having jurisdiction

(AHJ) for proper usage. Refer to your control

panel’s entry guide for programming

information.

3.1.1 Sensor Reset Command (COMMAND

47)

 O

n the D1260 and D1260B Keypads, when

the Sensor Reset command (COMMAND 47)

is executed, Call for Service appears

erroneously on the display for a brief time.

This effect also occurs when the control panel

reboots.

3.1.2 ANSI SIA CP-01

 Change

the Service Passcode (User ID 0)

factory default value when the ANSI SIA CP-

01 required Passcode Length parameter is 4

or greater.

3.1.3 ITS-DX4020-G

 When using

an ITS-DX4020-G as a GSM phone

device, the central station phone number

must have a dial pause (C) option as the first

digit.

3.1.4 Single RPS Connection

 Only one connection to

RPS can be made.

RPS does not notify you if you are already in a

connection.

3.1.5 Area Assigned

 When c

onfiguring a custom area scope for a

keypad, always include the Area Assigned.

Failure to do so results in inconsistent

operation.

3.1.6 COMMAND 7 and COMMAND 9

 Bosch r

ecommends that COMMAND 7 and

COMMAND 9 be configured to not require a

passcode. When an alarm is sounding, any

passcode entry for any command will silence

all alarms in all areas in which the user has

authority.

 If a low-priority alarm is within its abort

window and the alarm bell timer expires, the

keypad annunciation will persist unexpectedly

beyond the bell timeout. The keypad must be

manually silenced with a valid passcode.

4.0 Upgrading to a GV4 Series

Control Panel

RPS Accounts Upgrade

RPS version 5.14 or newer is required to upgrade

an existing G Series or GV2 Series Control Panel

installation to a GV4 Series Control Panel. Refer

to the RPS help files for the specific control panel

for additional information on control panel

conversion. In the RPS help file, select:

Panel Specific InformationCommunicating

with 9000 Series PanelsUpgrading a Panel

Type

Hardware Upgrade

 The GV4 c

ontrol panel's terminal blocks, SDI

quick-connect terminal, and accessory

connector are all fully compatible with all G

series and GV2 series control panel

peripherals.

The D5200 Programmer is not compatible

with the GV4 Series control panel.

 On-board Relays B (Terminal 7, labeled Alt

Alarm) and C (Terminal 8, labeled SW Aux)

are now installed in the factory. No

supplemental installation or purchase is

necessary to prepare these terminals for use.

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Bosch D9210C Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Bosch D9210C