Bosch D1265 Guía de usuario descargar pdf (Pagina 24)

D1265 | User's Guide | Part II: System Commands

24 Bosch Security Systems, Inc. | 9/10 | F01U169131-02

13. The display prompts the user to exit the area

and starts counting down # seconds to arm the

system.

# is the number of seconds remaining in the

countdown.

14. When exit delay time expires and the system

turns on, the display shows:

15. To disarm, enter your personal passcode and

press ENTER.

Special Alerts (CMD + 7, CMD + 9)

Description

Commands 7 and 9 can be programmed to respond to

specific situations that might need immediate attention.

They might also be used to send a silent alarm to your

security company without sounding an alarm signal on

the premises. Check with your security company for

the options they offer.

Using CMD 7

1. Ensure your keypad shows idle text.

2. Press the CMD button. The display shows

*System Command*.

3. Press the 7 button.

If you prefer, you might use the function

list in place of Steps 2 and 3 to initiate

this function.

Press the Menu button to enter the

function list.

Press the Next button repeatedly.

When you reach the User Command 7

button, press it.

4. Your Command 7 special alert has been

programmed to:

 notify your alarm company

 ring a bell on your premises

 display at your keypad

Description:

_________________________________________

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Sin comentarios

Bosch D1265 Guía de usuario Pagina 24