Bosch VideoJet 8008 Manual de usuario descargar pdf (Pagina 84)

Installation and Operating Manual | VideoJet 8008

EN | 84

Configuration using a Web Browser Bosch Security Systems | 2005-06 | V2.0

Alarm sources

You can configure the possible alarm triggers for the VideoJet 8008 (for

example the alarm inputs).

Alarm input 1 … Alarm input 10:

Select the option On in order to activate the alarm via the corresponding external

alarm sensor. Otherwise, select Off.

Select Active high if the alarm is to be triggered by closing the contact. Select

Active low if the alarm is to be triggered by opening the contact.

Name:

You can enter a name for each alarm input, which is then displayed below the

icon for the alarm input on the LIVEPAGE during configuration (see Livepage

configuration, page 94).

Video loss alarm:

Click the check box if you want interruption of the video signal to trigger an

alarm. The selected video inputs are checked.

Note

The numbering corresponds to the labeling of the video inputs on the rear

panel of the unit.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 135 136

Sin comentarios

Bosch VideoJet 8008 Manual de usuario Pagina 84