Bosch FPC-500-8 Guía de instalación descargar pdf (Pagina 40)

Deactivating Day Mode

Specify whether you want day mode (zones with alarm

verification start a verification time in the event of an alarm) to

be exited manually by the user or automatically at a defined

time. You can program the time in this submenu.

Notice!

Day mode must always be started manually; it is not possible to

configure an automatic start.

Press zone key 2. This takes you to the Delay Config

menu.

Press zone key 1.

This takes you to the Day Mode Off submenu.

...

Use zone keys 1 or 2.

– 1=Manual (default setting)

– 2 Automatic

If you set Day Mode Off to Automatic, you must program the

changeover time from day to night mode.

1 2 3 4 5 6 7 8

Off Time: :17:00

Confirm with

Set the time with the arrow keys and confirm using the ACK key.

Alarm Verification

Notice!

This setting only applies to zones that are programmed as alarm

verification.

Note that the delay settings are only effective in day mode. In

night mode, the alarm is triggered immediately.

4.2.1

4.2.2

40 en | System Configuration Conventional Fire Panel

2014.06 | 7.0 | F.01U.172.980 Bosch Sicherheitssysteme GmbH

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 81 82

Sin comentarios

Bosch FPC-500-8 Guía de instalación Pagina 40