Bosch PIL611N14E Manual de instrucciones descargar pdf (Pagina 9)

To deactivate

1. Select a hotplate.

2. Press the Gboost symbol. The Powerboost function has

been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

Turning off a hotplate automatically

Enter the time period for the hotplate. The hotplate turns off

automatically once the time has elapsed.

How to program

1. Select the required hotplate and power level.

2. Press the 0 symbol twice. ‹‹ y and __. light up in the time

programming function display

3. Program the time using symbols 1 to 9.

The cooking time starts.

Once the time has elapsed

The hotplate switches off once this time has elapsed. A beep is

heard and

‹.‹ appears in the hotplate and the time

programming function display shows

‹‹ for 10 seconds.

When the

0 symbol is pressed, the displays turn off and the

beep goes off.

Changing or cancelling the time

Select the hotplate and press the

0 symbol twice.

The __ and

r displays appear

Change the cooking time using symbols 1 to 9 or press 0 to

cancel the time.

Notes

■ If a cooking time has been programmed, the display always

shows the time of this function. To check the cooking time

remaining in a hotplate, select a hotplate and press the

0 symbol twice.

■ If a time has been programmed for several hotplates, the

time of the selected hotplate is always shown.

■ Any cooking time can be programmed for up to 99 minutes.

Automatic timer

With this function you may select a cooking time for all

hotplates. Once a hotplate is switched on, the selected time will

begin to count down. The hotplate will automatically switch off

when the cooking time has elapsed.

Instructions on activating the timer are found in the chapter

entitled "Basic settings".

Note: The cooking time of a hotplate can be modified or the

automatic timer can be turned off.

Press the

0 symbol,several times until the required display $

lights up. Change the time of the cooking cycle with the 1 to 9

symbols, or turn off with 0.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

1. Press the 0 symbol. The V indicator lights up. ‹‹ lights up

in the time program function display.

2. Set the required time using symbols 1 to 9.

The time starts again after a few seconds.

Once the time has elapsed

Once the time has elapsed, a beep will sound.

‹‹ and Uare

displayed in the time program function display. After pressing

the

0 symbol, the indications turn off.

Changing or cancelling the time

Press the

0 symbol, the U indicator lights up.

Change the time using the 1 to 9 symbols or press 0 to cancel.

Cleaning protection

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning protection

function.

Press the

>D symbol. The control panel is locked for

approximately 35 seconds.

The surface of the control panel can now be cleaned without

risk of changing the settings.

After the time has elapsed, a warning beep will sound and after

a few seconds the function is deactivated. The control panel

lock has been deactivated.

Note: The cleaning protection function does not include the

>D symbol or the main switch. The hotplate may be switched

off when required.

 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Bosch PIL611N14E Manual de instrucciones Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Bosch PIL611N14E