Bosch FPP-5000-TI13 LSN Communication Interface for FPP- Manual de usuario descargar pdf (Pagina 19)

Functional Description

The Trouble Interface Module is an extension for the External Power Supply Unit Kit only. It is

the communication interface between the External Power Supply Unit Kit and the panel, and

transmits the following faults to the panel:

– Mains fault

– Battery fault

– Battery internal resistance fault

– BCM Battery Controller Module fault

– Short 24 V outputs

– Ground fault

Additionally, with the programming software, the switching outputs can be programmed and

the settings for the line monitoring according to EN54-13 can be done.

The module is plugged next to the BCM-0000-B Battery Controller Module on the PRS 0002 A

Panel Rail Short and is power-supplied by the panel rail via the module bus (MOB). The

module’s front side shows 4 LEDs, which indicate the operation and fault status.

LSN Communication Interface

FPP-5000

Functional Description | en

Bosch Sicherheitssysteme GmbH Installation Guide 12/2012 | 5.0 | F.01U.164.562

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Sin comentarios

Bosch FPP-5000-TI13 LSN Communication Interface for FPP- Manual de usuario Pagina 19