Bosch CC488 Especificaciones descargar pdf (Pagina 18)

CC484/CC486/CC488 | Operators Manual | 21. Basic Pager Reporting EN | 18

Bosch Security Systems | 6/04 | 4998152445B

Table 14: Zone Status Display Descriptions

Number

Displayed

Zone

Description

Zone Normal

Indicates the corresponding zone is in

the sealed state.

Alarm

Indicates the corresponding zone is

unsealed and in alarm condition.

Zone Bypassed

Indicates a system operator manually

isolated the corresponding zone. See

Section 8. Isolating Zones for

information on how to manually isolate a

zone(s) prior to arming the system.

Zone Trouble

Indicates a zone was left unsealed after

the end of exit time.

System Status

The system status information is divided into four

digits.

Table 15: System Status

System Status

Display

Description

First digit Indicates whether the system is

armed or disarmed:

8 = Disarmed

9 = Armed

Second digit Indicates which codepad alarm was

triggered by the operator:

0 = No Codepad Alarm

1 = Codepad Panic or Duress

Alarm

2 = Codepad Fire Alarm

3 = Codepad Medical Alarm

Third digit Indicates when the AC mains

supply fails:

0 = AC Supply is normal

1 = AC Supply has failed

Fourth digit Indicates when a system fault

occurs at the control panel:

0 = System Normal – There are no

faults

1 = System Fault – There is a fault

registered by the control panel

Figure 7 shows that the transmission came from the

control panel with ID number 678, and that zone 2

is in alarm. The figure also shows that zone 3 was

manually isolated and the system armed.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comentarios a estos manuales

Sin comentarios

Bosch CC488 Especificaciones Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch CC488