
Bosch Security Systems B.V.
28 | Infra-red Radiators
www.boschsecurity.com
LBB 3410/05 Infra-red Radiator
Features
X Economic solution for small conference venues
X Covers up to 200 m² (2150 ft²) with one carrier, 4
standard quality channels
X Automatic gain control ensures the IREDs (infra-red
emitting diodes) function with maximum efficiency
X Power output selection for efficiency and economy
Introduction
The LBB 3410/05 low power wide beam radiator is used to
distribute infra-red signals throughout a small conference
venue, enabling delegates to listen to the proceedings by
means of personal receivers.
Functions
• Attractive and stylish design
• Built in power supply
• Automatically switches on when transmitter is switched
on and vice versa
• LED indicators for radiator status checking
• Adjustable radiator angle ensures maximum coverage
• IREDs protected by a front cover, making the units easy
to maintain and clean
Limitations
• Only the first 4 carriers can be transmitted
• Not more than 100 m (328 ft) cable length from
transmitter to last radiator
• Direct connection of the radiators to the transmitter with
equal cable length. In loop-through connection, the total
cable length from the first to the last radiator may not
exceed 5 meters.
Reason: there are no facilities on this radiator for
compensating the cable signal delay
• Don’t use this radiator in combination with LBB 4511/00
and LBB 4512/00 radiators in one system, as the internal
signal delay of these radiators is different
• No automatic cable termination: the termination plug has
to be connected to the last radiator in a trunk
• No communication of the radiator status to the
transmitter
• Using this radiator at 105 to 125 V requires internal
adjustments
Controls and Indicators
• Green LED to indicate the radiator is switched on and is
receiving carrier waves from the transmitter
• Red LED, which illuminates when the infra-red output
power of the radiator is reduced to 70% or less of normal
output level
• Power reduction switch to reduce the output of the
radiator to half-power
Interconnections
• Male mains socket for mains connection
• HF input and output connectors (2 x BNC) for connection
to transmitter and loop-through to other radiators
Parts Included
Technical Specifications
Quantity Component
1 LBB 3410/05 Infra-red Radiator
1 Bracket for mounting on ceiling, wall and floors stands
1 Termination plug and mains cable
Electrical
Mains voltage 105 to 125 V or 220 to 240 V internally
selectable, 50 to 60 Hz
Power consumption
operating
standby
25 VA
5VA
Number of IREDs 88
Total IR output 1.8 Wrms 3.0 Wpp
Total optical peak intensity 2.0 W/sr
Angle of half intensity ± 24° vertical, ± 48° horizontal
Mechanical
Mounting Bracket for ceiling, wall and floor stand
mounting with 3/8 in Whitworth thread
Dimensions (H x W x D) 176x300x125mm
(7x12x5in)
Radiator angle 0 to 90° (without steps)
Weight 1.5 kg (3.3 lb)
Color Black
Ordering Information
LBB 3410/05 Infra-red Radiator
low-power, wide-beam, covers up to 200 m²
(2150 ft²), not available in EU countries, Norway
& Zwitserland
LBB3410/05
Comentarios a estos manuales