
MIC400 Aluminum PTZ Camera | 3
18x Optical Zoom Module
Lens F=4.1 mm (wide) to 73.8 mm (tele), F1.4 to
F3.0
Zoom 18x optical (12x digital)
Angle of view 48° (wide) to 2.8° (tele)
Minimum illumination 0.7 lux (F1.4, 1/60 s NTSC, 1/50 s PAL),
0.11 lux (F1.4, 1/4 s NTSC, 1/3 s PAL), 0.01 lux
or less (F1.4, 1/4 s NTSC, 1/3 s PAL, ICR ON)
Shutter speed 1/1 to 1/10,000 s (22 steps) NTSC, PAL
36x Optical Zoom Module
Lens F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to
F4.5
Zoom 36x optical (12x digital)
Angle of view 57.8° (wide) to 1.7° (tele)
Minimum illumination 1.4 lux (1/60 s NTSC, 1/50 s PAL),
0.1 lux (1/4 s NTSC, 1/3 s PAL), 0.01 lux or less
(1/4 s NTSC, 1/3 s PAL, ICR ON)
Shutter speed 1/4 to 1/10,000 s (20 steps) NTSC, 1/3 to
1/10,000 s (20 steps) PAL
Operational
Auto flip Yes
Manual flip Yes
Dynamic privacy zones 3D privacy masking with infinite zones (using
optional privacy card)
Presets 64 telemetry presets utilizing resolver technol-
ogy (using FV protocol, 10 camera set-up pre-
sets to allow ANPR, color correction etc.)
Preset tours 6 tours each with up to 32 presets
Sector titles Yes (64 sectors) 20 characters per title
Preset titles 20 character caption for each of the 64 presets
Home position Yes (preset 1 or tour)
Communication and Protocols
Communication RS485 / RS422
Control protocol Bosch, Pelco P/D or FV protocol cameras avail-
able. Bosch camera requires Biphase to RS485
converter (MIC‑BP4) available separately. Oth-
er protocols supported. Please consult separate
protocol list for available options.
Connectivity
Video Co-axial via composite cable
Telemetry Twisted pair. Simplex, half and full duplex op-
eration via composite cable
Power Via composite cable
Alarms
Alarm inputs 1 tamper input (additional inputs possible with
optional alarm card in PSU)
Alarm communication Tamper switch (ground connection)
Mechanical
Drive unit Integral pan/tilt motor drive
Pan angle 360° continuous rotation
Pan speed Up to 90° per second (variable)
Tilt angle 320°
Tilt speed 0.2° to 90° per second (variable)
Speed control Closed loop electronics
Preset accuracy Better than 0.08°
Proportional P/T to zoom Yes
Construction
Construction material 6 mm thick aluminum
Viewing window Tempered flat glass
Standard colors Black( RAL9005), Gray (RAL7001) or White
(RAL9003)
Standard finish Powder coated
Dimensions 205 x 360 x 165 mm (WxHxD)
8 x 14.2 x 6.5 in (WxHxD) (upright and inverted)
Weight 5.5 kg (12 lb) including 4 in. pitch circle diam-
eter (PCD) base
Environmental
Operational temperature -20 °C to +50 °C (-4 °F to +122 °F)
(-30 °C (-122 °F) with optional heater)
Weather proofing NEMA 4x / IP68
Electrical
Input voltage 15 VAC / 18 VDC
Power consumption 25.2 W max. without heather
45.2 W max. with Heater
Options
Configurations available Upright mount or upright canted at 45° mount.
(Inverted mount is possible using software set-
ting. Please order upright camera.)
Color/Finish Black, grey, or white
Camera module 18x camera module or 36x camera module
Camera color system NTSC or PAL
Telemetry control card Built-in
Window wiper Fitted as standard
Washer Optional, (only bracket and nozzle supplied)
Washer pump drive card Optional, fitted in PSU
Heater Optional, factory fit
Privacy board Optional, factory fit
Alarm card Optional, fitted in PSU
www.boschsecurity.com
Comentarios a estos manuales