Bosch AMAX panel 2000 EN Manual de usuario descargar pdf (Pagina 15)

AMAX panel 2000 / AMAX panel 2000 EN Bypassing | en 15

Bosch Sicherheitssysteme GmbH User Guide F.01U.249.500 | V4 | 2011.12

7Bypassing

7.1 Bypassing Zones

By bypassing Zones, one or more zones are disabled for one arming cycle. After bypassing a

zone, you can arm the system even when a zone is in alarm state.

How to bypass a zone

1. Enter your code and press [9] [#]. The STAY indicator flashes fast.

2. Enter the zone number you wish to bypass, then press the [*] key.

(If you wish to bypass multiple zones, please repeat step 2).

3. If you wish to cancel bypassed zone, enter the zone number of the bypassed zone , then

press the [*] key.

(If you wish to cancel several bypassed zones, please repeat step 3.)

4. Press [#] to exit.

7.2 Bypassing Faults and Tamper conditions (Except Zone

Tampers)

Bypassing Faults and Tamper conditions, one or more faults and tamper conditions are

disabled for one arming cycle. After bypassing a Fault or Tamper condition, you can arm the

system even when a Fault or Tamper condition exists.

How to bypass faults and tamper conditions

1. Enter user code + [97] and press [#].

Two beeps sound.

NOTICE!

If the selected zone is already bypassed, when operating this zone, the bypass from this zone

will be cancelled.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Bosch AMAX panel 2000 EN Manual de usuario Pagina 15