Bosch B4512 El manual del propietario descargar pdf (Pagina 131)

To test individual detection devices, simply activate

sensors and open protected doors and windows one-at-

a-time. As you fault each detection device, the keypad

from which you initiated the test emits a brief tone, and

for 60 seconds the display indicates that the point was

tested. The tone and display verify that each detection

device is working properly. Keypads within the area’s

scope from which you did not initiate the walk test

show Walk test in progress during the testing.

Performing a walk test:

1. Press [MENU] to open the Main menu.

2. Use [NEXT] to go to the Actions menu option, and

press [ENTER], or simply press [3].

3. Use [NEXT] to go to the Test menu option, and press

[ENTER], or simply press [3].

4. Press [1] or [ENTER] to open the Walk Test menu.

5. Enter your passcode and press [ENTER].

6. Use [NEXT] to go to the desired walk test, and press

[ENTER], or simply press the number key for the

desired walk test: [1] for Fire, [2] for Intrusion, [3]

for Service, or [4] for Invisible.

7. Press [ENTER] to view the points.

8. Use [NEXT] to toggle through your desired point and

view the status of that point.

9. Press [ESC] to exit the menu.

Control Panels

B920 Actions menu | en 131

Bosch Security Systems, Inc. Owner's Manual 2012.12 | 03 | F.01U.265.453

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 187 188

Sin comentarios

Bosch B4512 El manual del propietario Pagina 131