Bosch D9000, G Manual de usuario descargar pdf (Pagina 13)

D9000,G & GV2 Series | Owner's Manual Supplement

Bosch Security Systems | 5/05 | 33267F 13

10.3 Cycle Door?

1. To momentarily unlock an access door and allow a person into an

area, press [ENT] at the Cycle Door? prompt.

The display shows CYCLE 1 2 3 4 5 6 7 8 if all doors are in

a normal state and available. If a door is not in a normal state, the

number of the door is replaced with one of the symbols indicated

in Table 1.

Table 1: Key to Symbols

Symbol Description

---

Door is not active, not in scope, or user does

not have access level authority

Door is timed door sequence

Strike and shunt are latched active (held open)

Strike and shunt are deactivated (secured)

P There is a problem with the door; call your

security company

2. Enter the number of the door to cycle then press [ENT]. This

door cycles and the display changes to reflect the new status of

the doors. For example, to cycle Door 3, at the following prompt:

CYCLE DOOR 1 2 3 4 5 6 7 8

press [3], then [ENT]. The display shows:

CYCLE DOOR 1 2 C 4 5 6 7 8

This indicates that all doors are in a normal state, except for Door

3, which is cycled.

3. Press [ESC] to leave this subfunction, or enter another door

number to cycle.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Bosch D9000, G Manual de usuario Pagina 13