DS7400XiV4-EXP
DS7400XiV4-EXP Release Notes
4998154793B Page 5 © 2005 Bosch Security Systems
Table 12 shows the available options when you install
two RS-232 modules on one system.
Table 12: Network Module Options
Available Options
Network
Module
Print Direct Connect/
Alt Comm RPS
Connection
AltComm
Reporting
Module 1 Yes Yes Yes
Module 2 Yes No Yes
If both network modules are enabled, only
the second module prints history reports.
2.1.11 RS-232 Printer Baud Rate Programming
If using the Network Communication Module to
connect the control panel to an RS-232 printer, you
can configure the module’s baud rate.
• Addresses: 4020 (Module 1); 3042 (Module 2)
• Data Digit:
• Data Digit 1: ____ (refer to Table 13;
default = 0)
• Data Digit 2: ____ (refer to Table 9;
default = 0)
• Selections: 0 to 5 for Data Digit 1
Table 13: Module 1 and 2 Baud Rate, Data Digit 1
Select Option Value
300 baud
0
1200 baud 1
2400 baud 2
4800 baud 3
9600 baud 4
14400 baud 5
2.2 Door Access Control Module
(DACM) Support
Use Keypad/DACM Assignment Programming to
assign a keypad or DACM to a keypad bus address,
and to identify its area (partition).
The DS7400XiV4 supports up to eight DACMs. Each
DACM must have a unique keypad bus address.
You can only assign a DACM to Keypad
Bus Addresses 3 to 10.
You cannot assign a DACM and a keypad
to the same address.
Once a DACM is assigned to a keypad bus address,
the control panel forces Zones 9 through 16 to the
DACM door contact zone type. If you remove all
DACMs from the system, Zones 9 through 16 return
to their programmed values. Although the zone type is
forced, the zone function programming applies. Refer
to Table 14, and also the DS7400XiV4-EXP Control
Panel Reference Guide (P/N: 4998154963).
Table 14: DACM Address, Zone, and Zone
Function Addresses
Keypad Bus
Address that
DACM Occupies
Zone Zone
Function Address
3 9 0039
4 10 0040
5 11 0041
6 12 0042
7 13 0043
8 14 0044
9 15 0045
10 16 0046
Refer to the DACM Installation Instructions
(P/N: F01U500999) for more information.
• Addresses: 3132 to 3135
• Data Digit: Refer to Table 15.
• Defaults: Refer to Table 15. If using only one
keypad, the default is an Alpha keypad belonging
to Area 1. Otherwise, the default is 0.
(54 paginas)
(123 paginas)
(16 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales