Bosch DS7445 Guía de usuario descargar pdf (Pagina 33)

- 33 -

This chart explains the procedure for performing a Battery Test.

If a power failure occurs, your control panel has a built-in battery that will continue to power the control panel for many hours.

The control panel automatically recharges the battery when power is restored.

In addition to an automatic battery test performed every 2 minutes, the battery may also be tested manually.

This test also uses the battery to manually activate all the system sounders for 2 seconds ([PIN] [#] [8] [5] only).

If the battery voltage is low, a battery fault will occur (see

Error Displays

Testing your System (continued)

* = If this test is performed from a Master keypad, it must be in Single Partition Mode.

What will Happen

Command

Sequence

[PIN] + [#] [8] [5]

pe of

Test

Local

Batter

Sounder Test*

What to Do

If test fails, the control panel will indicate

a control problem. See

Error Displa

If power in

our buildin

has been off

recentl

, wait 2 hours for the batter

to rechar

e and then tr

ain.

[PIN] + [S

stem Reset]

Batter

Test

•All ke

pad Li

hts will turn on.

•The ke

pad sounder and all alarm

soundin

devices will operate for 2

seconds.

• The control will perform a Batter

Test.

• The control will report a Low Batter

a Low Batter

Restoral if necessar

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Comentarios a estos manuales

Sin comentarios

Bosch DS7445 Guía de usuario Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445