Bosch DVA-12T Manual de instalación descargar pdf (Pagina 23)

RAID Subsystem DVA-16K | Installation Manual Hardware Installation | en 23

Bosch Security System F.01U.027.799 | V2 | 2008.08

Fig. 3.3 Installing a Drive Tray

4. Close the front flap on the drive tray. Make sure the front flap is closed properly to

ensure that the SATA connector at the back of the drive tray is firmly connected to the

corresponding connector on the mid-plane board. If the front flap is not closed properly,

the connection between the hard drive and the subsystem will not be secure.

5. Lock the flap into place by turning the key-lock until the groove on its face is pointing

down (vertical orientation). (See Figure 3.4)

Fig. 3.4 Drive Tray Key-lock Rotation

6. Once the drive tray is inserted, the RAID controller will recognize the drive and scan it in

automatically.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Sin comentarios

Bosch DVA-12T Manual de instalación Pagina 23