Bosch LTC 0465 Series Manual de servicio descargar pdf (Pagina 15)

Dinion Day/Night Camera Connections | en 15

Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01

3.3 Alarm and relay connector

Figure 3.4 Alarm and relay connector pins

– Max. wire diameter AWG 22-28 for both stranded and

solid; cut back 5 mm (0.2 in) of insulation.

– Default relay position normally open (n.o.); no alarm.

– Alarm output relay switching capability: Max voltage 30VAC

or +40 VDC. Max 0.5 A continuous, 10 VA.

– Alarm in: TTL logic, +5V nominal, +40 VDC max, DC coupled

with 22 kOhm pull-up to +3.3 V.

– Alarm in: configurable as active low or active high.

– Max. 42 V allowed between camera ground and each of the

relay pins.

Pin Alarm socket

1Alarm in ground

2Alarm in

3 Relay out contact 1

4 Relay out contact 2

ALARM

5 mm

(0.2 in)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Sin comentarios

Bosch LTC 0465 Series Manual de servicio Pagina 15