
48 | MiniLine Cameras Vandal | Impact proof
www.boschsecuritysystems.com
CCTV
LTC 1271 Series, Corner Phortress
As an extension of the MiniLine products, Bosch offers a
corner-mounted version of the high security grade, aluminum
Phortress. The LTC 1271 Series Corner Phortress offers the
same camera protection with a discrete design that works well in
most indoor corner applications. The camera can mount flush to
the ceiling, or it can be wall mounted below ceiling level. It
comes in a standard white finish for use in lobbies, elevators,
and other design-specific locations.
Features
• High Security Phortress Design
• Withstands 120 lbs of Direct Force on the Polycarbonate
Dome
• Integral Color, High Resolution Camera with Wide Angle,
Varifocal Lens
• Available in Standard or Brushed Aluminum Finishes
• 24 VAC with Line-lock & Phase Adjust
• All-in-one Package with No Separate Corner Bracket
Required
Functions
The Corner Phortress includes a full featured camera/lens
combination in a cast aluminum housing (with the strength of
10 gage steel) and polycarbonate bubble that can withstand the
equivalent of 120 lbs of force. The unit can also endure 300 lbs
of weight, if an attempt was made to pull the unit down from a
masonry wall, provided that the recommended mounting bolts
are employed.
The Phortress's flexible varifocal camera makes it an ideal
replacement for traditional camera installations, where extra
security is required. Its sleek design, choice of finishes, and
small, inconspicuous appaerance allow for an attractive look that
complements most decors.
Parts Included
Installation/Configuration Notes
Quant. Component
1 LTC 1271 / xx
01 3/4-inch threaded conduit
Opening 1 of 3.
2 plugs supplied
03 Closure secured with tamper-
resistant screw. Driver bit
supplied
02 Hole location both sides 04 2 Holes each side
mm
in
3/4-inch
threaded conduit
Opening 1 of 3.
two plugs supplied.
173.5
6.83
90
66.7
2.63
Hole location
both sides
122.7
4.83
171.3
6.74
42.1
1.66
92.1
3.63
Ø 7.1
0.28
Two holes
each side
Closure secured with
tamper-resistant screw,
driver bit supplied.
176.8
6.96
99.31
3.910
Comentarios a estos manuales