Camera Module (thermal)
Lens 50 mm
Image sensor Focal Plane Array (FPA), un-cooled Vanadium
Oxide microbolometer
30 Hz NTSC, 25 Hz PAL; US export license
required.
Picture elements 324(H) x 256(V)
Spatial resolution 0.760 mrad with 50 mm lens
Field of view 14°(H) x 11°(V) with 50 mm lens
Focus Factory-set at infinity focus
Spectral response 7.5 to 13.5 μm
Thermal sensitivity <85 mK at F1.6
Electronic zoom 2X
Features White hot, black hot, and false color modes
Performance Range Human 1.8 x 0.5 m
(5.9 x 1.6 ft)
Object 2.3 x 2.3 m
(7.5 x 7.5 ft)
Detection 780 m (2559 ft) 2.2 km (2200 m)
(7218 ft)
Recognition 200 m (656 ft) 590 m (1,936 ft)
Operational
E-flip Yes, E-flip enables the optical camera to invert the
image
Manual flip Yes
Presets 64 telemetry presets accurate to less than
0.1°utilising resolver technology (using FV protocol,
10 camera set-up presets to allow ANPR, color
correction etc.)
Preset tours 6 tours each with up to 32 presets
Sector titles Yes (64 sectors) 20 characters per title
Preset titles 20 character caption for each of the 64 presets
Home position Yes (preset 1 or tour)
Communication and Protocols
Communication RS485 / RS422
Control protocol Bosch or FV protocol cameras available;
additional protocols supported are Pelco D, Kalatel,
Panasonic, and VCL. These can be loaded using the
MIC-USB485CVTR signal converter and Cam-set
via a PC.
Biphase control requires a Biphase to RS485
converter (MIC-BP4, available separately) installed
in the MIC Series PSU to connect to Biphase
equipment.
Connectivity
Video Single co-axial via composite cable (optical/
thermal cameras, user switchable)
Telemetry Twisted pair; Simplex, half and full duplex
operation via composite cable
MIC Universal Camera
Setup Software Utility
(Camset)
Supplied with each camera, Cam-set allows
direct connection to a USB-equipped PC via
the MIC Series PSU over a full duplex or IP
network to provide access to all camera
functions and useful diagnostic tools
USB to RS485 signal
converter
Allows MIC Series cameras to connect to a
PC (supplied free with camera, or available
separately)
Power Via composite cable
Alarms
Alarm inputs 1 tamper input (additional inputs possible
with optional alarm card in MIC Series PSU)
Alarm communication Tamper switch (ground connection)
Mechanical
Drive unit Brushless integral pan/tilt motor drive
Pan angle 360° continuous rotation
Pan speed Up to 72° per second (variable)
Tilt angle 260°
Tilt speed 0.2° to 90° per second (variable)
Speed control Closed loop electronics
Preset accuracy ±0.30 degrees (typical)
Proportional Pan/Tilt to
Zoom
Yes
Electrical
Input voltage (dual
source)
18VAC, +/-10%, 50/60 Hz
Input current Camera: 2 A
Heater: 1 A
Environmental
Operating temperature -40 °C to +50 °C (-40 °F to +122 °F)
Weatherproofing IP68 (1m submersion for 24 hours)
Construction
Dimensions (W x H x D) 267 x 445 x 200 mm
(10.51 x 17.52 x 7.87 in.)
Weight 9.5 kg (20.94 lb)
(including 4-in. PCD base)
Viewing window Tempered flat glass (optical) and
germanium covering (thermal)
Construction material Machined aluminum
3 | MIC Series 412TF Thermal Camera
(64 paginas)
(19 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales