Bosch MIC400 Especificaciones descargar pdf (Pagina 5)

VIP X1 to MIC400 | Connection Guide AEN| 5

Bosch Security Systems Issue 1

Intentionally Blank

CHAPTER 1 Introduction

This guide is to assist users with connecting Bosch Security Systems MIC400

range of PTZ cameras to the Bosch VIP X Network Video Server.

The VIP X1/VIP X2 Installation and Operating manual should be referred to for

installation and full operating instructions for the VIP X1/VIPX 2 Network Video

Server and the appropriate MIC400 Installation and Operation manual covers

installation and setup of the MIC400 series PTZ cameras, both should be to hand

during installation or commissioning and take precedence over this guide.

The VIP X is an ultra-compact network video server for one (VIP X1) or two (VIP

X2) connected video sources. Its primary function is to encode video and control

telemetry data for transmission over an IP network. With its encoding in MPEG-4

format, the VIP X is ideally suited for adapting analogue cameras for IP

communication and remote access to digital video recorders and multiplexers.

Due to its compact size (about the same as a cigarette packet), it can easily be

integrated into small housings without difficulty. The use of existing networks

means that integration with CCTV systems or local networks can be achieved

quickly and easily.

Two units for example a VIP X as the transmitter and another VIP X as the

receiver can form a stand alone system for data transfer without a PC. Video

images from a single transmitter can be simultaneously received on several

receivers.

Bosch VIP X1/VIP X2 –

http://office.manualsonline.com/manuals/mfg/bosch/vip_x1vip_x2.html

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Bosch MIC400 Especificaciones Pagina 5