Bosch VEN-650V05-2S3F Manual de instrucciones Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 47
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
EX65 Explosion-protected Camera Maintenance | en 39
Bosch Security Systems, Inc. Instruction Manual F.01U.412.061 | 1.0 | 2011.03
6. Lock the back focus locking button.
7. Press and hold the center key for more than two (2) seconds until all menus disappear.
8. Close the side door panel.
10.6 Replacement of the Mounting Cradle
1. Disconnect power from the EX65 and, optionally, remove all connections.
2. Using a 10 mm wrench or the supplied multi-use tool, remove the three (3) M6 bolts
holding the mounting cradle to the mounting surface.
3. Put the EX65 in a safe location.
4. Using a 7 mm wrench or the supplied multi-use tool, remove the seven (7) M4 bolts
holding the mounting cradle to the housing.
5. Install a new mounting cradle in reverse of installation and tighten the seven (7) M4 bolts
to 1.5 ft/lb (2.0 N/m).
6. Finish installation as described in Section 7 Mounting, page 22.
Bosch
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 46 47

Comentarios a estos manuales

Sin comentarios