AC Input Line Voltage Use a UL Listed 18 V Class 2 transformer (22
VAC, VA 50/60 Hz)
Total Alarm Power: 1.4 A (AC power and standby battery;
intrusion applications only).
With a 7.0 Ah battery, the following current
draws apply to all outputs and devices
connected to the system:
• Up to 170 mA for 24 hr for fire and
combined fire/burglary applications
• Up to 1.2 A for other applications
Auxiliary Power: 12 VDC, 1.0 A maximum. Includes 110 mA
for each control center connected to the
system, and up to 400 mA for the
programmable outputs.
Current Draw: 85 mA standby; 160 mA alarm with all
outputs activated
Voltage: 12 VDC nominal (11.2 VDC to 12.3 VDC)
The control panel stops processing point
faults when the voltage drops below 9.5 VDC.
Battery: D126 (7 Ah) or D1218 (18 Ah) sealed, lead
acid rechargeable
1.7 A maximum recharging current
Low battery condition occurs when battery
drops below 12 VDC
If AC power fails and the battery drops below
9.5 VDC, the control panel stops processing
point faults. Disconnect the battery under
these conditions.
Maximum auxiliary current to recharge
standby battery within 72 hours:
• 12 V, 7 Ah Battery: 400 mA
• 12 V, 18 Ah Battery: 900 mA
In an NF A2P certified installation, use a
battery Yuasa NP17-12IFR
Ordering information
ICP‑EZM2‑LC Mainboard
Easy Series mainboard.
Order number ICP-EZM2-LC
IUI‑EZ1-NEW Oval Control Center
Oval control center that includes a speaker,
microphone, function buttons, and a bubble level.
Order number IUI-EZ1-NEW
Accessories
IUI‑EZT‑5 Easy Series Token Package
Five Easy Series proximity tokens.
Order number IUI-EZT-5
IUI-EZTR-5 Easy Series Token Package
Five Easy Series proximity tokens (Red).
Order number IUI-EZTR-5
IUI-EZTO-5 Easy Series Token Package
Five Easy Series proximity tokens (Orange).
Order number IUI-EZTO-5
IUI-EZTG-5 Easy Series Token Package
Five Easy Series proximity tokens (Green).
Order number IUI-EZTG-5
IUI-EZTY-5 Easy Series Token Package
Five Easy Series proximity tokens (Yellow).
Order number IUI-EZTY-5
ICP‑EZPK Programming Key
Blue key for transferring information to and from Easy
Series Intrusion Control Panels.
Order number ICP-EZPK
RADION receiver OP (433.42 MHz)
A wireless receiver that connects RADION wireless
peripherals such as the repeater, as well as detectors
and transmitters, to supported Bosch control panels.
Order number RFRC-OPT
ICP-EZRU2-V3 ROM Update Key
Key for performing Flash upgrades.
Order number ICP-EZRU2-V3
DX2010 Input Expander
Zone expansion module with 8 DOEL zone inputs.
Order number DX2010
B426 Ethernet Communication Module
Supports two-way communications over Ethernet
networks for compatible control panels.
Order number B426
B450 Conettix Plug-in Communicator Interface
Supports two-way IP communication over commercial
cellular networks using a plug-in Cellular
Communicator for compatible control panels.
Order number B450
AE3 Large Enclosure (Gray)
Large gray enclosure with keyed lock. Measures
52.7 cm x 38.1 cm x 10.8 cm (20.7 in. x 15 in. x
4.25 in.).
Order number AE3
3 | Easy Series
(2 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales