Bosch WVH2836SGB Especificaciones Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
Water drainage
Power cord
Water supply
Covers
Hose holder
Aqua-Stop Aqua-Secure Standard
Elbow
for fixing the waste
water hose
2
Installation area
Stability is important to prevent the machine from wandering.
The installation area must be firm and level.
Soft floors/floor coverings are not suitable.
Ensure the area is well ventilated to achieve good drying performance.
If installing the appliance on a platform
It is essential to secure the washer dryer feet with holding brackets *.
If installing the appliance on a wooden joist floor
If possible, install the washer dryer in a corner.
Screw a water-resistant wooden panel (min. 30 mm thick) to the floor.
It is essential to secure the washer dryer feet with holding brackets *.
* order no. WMZ 20490, WZ 20490
Hose and cable lengths
Connection on left side
or
Connection on right side
Note: If hose holders are used, the hose lengths may be reduced.
Available from dealer/after-sales service:
Aqua-Stop extension hose **, approx. 2.50 m.
Longer supply hose, approx. 2.20 m, for standard model.
** order no. WMZ 2380, WZ 10130
Built-under/built-in appliances
Build these appliances under/in before connection to the power supply.
Installed in between kitchen units (built-under or built-in)
62 cm cavity width required.
Install the washer dryer only under a continuous worktop that is connected firmly to the
adjacent cupboards.
~160 cm
~95 cm ~140 cm
~165 cm
~140 cm
~90 cm
max. 100 cm
min. 60 cm
a
ʑ
ʑ
a
ʑ
a
ʑ
ʑ
ʑ
ʑ
ʑ
Vista de pagina 2
1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios