Bosch ZSB 30-2 A Instrucciones de operaciones Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
Inspection/Servicing | 55
6 720 644 143 (2010/09)
15 Inspection/Servicing
To ensure that gas consumption and environmental
impact remain as low as possible over an extended
period of time, we recommend that you take out an
inspection/servicing contract with an authorised
contractor covering an annual inspection, and servicing
at other times as required.
Important notes
The following test equipment is required:
Electronic flue gas emission meter for CO
2
, CO and
exhaust temperature
Pressure gauge for 0 - 30 mbar (0 - 3 kPa)
(resolution at least 0.1 mbar (0.01 kPa)
Special tools are not required
Permissible lucricants:
For components in contact with water: Unisilkon L
641 (8 709 918 413)
Unions: HFt 1 v 5 (8 709 918 010).
B Use 8 719 918 658 as heat conducting paste.
B Only use genuine spare parts!
B Refer to the spare parts catalogue when ordering
spare parts.
B Always renew seals and O-rings removed during
servicing or repair work.
After inspection/servicing
B Retighten all loosened threaded fittings.
B Recommission the appliance (Æ page 35).
B Check all connections for leaks.
B Check the gas-air ratio and adjust if necessary
(Æ page 50).
DANGER: Risk of explosion!
B Turn off gas valve before working on gas-
carrying components.
B Check for leaks before working on gas-
carrying components.
DANGER: Risk of poisoning!
B Check for leaks before working on gas-
carrying components.
DANGER: Risk of electric shock!
B Before carrying out work on electrical
components, disconnect the power
supply (230 V AC) (fuse, circuit breaker)
and secure against unintentional
reconnection.
WARNING: Risk of scalding!
Hot water can cause severe scalding
B Drain the appliance before working on
components that carry water.
NOTE: Leaking water may damage the
Heatronic module.
B Cover the Heatronic module before
working on any parts that carry water.
For an overview of faults, see page 67.
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 79 80

Comentarios a estos manuales

Sin comentarios