Bosch DIVAR AN 3000 Guía de instalación descargar pdf (Pagina 30)

Finish configuration page

After clicking Save and activate the configuration is activated.

After successful activation the Activate Configuration page is

displayed again. Now you can store a backup of the

configuration if desired: Click Save backup copy.

Using Bosch VMS Configuration Client

If the IP addresses of devices that should be added do not fall

within the same IP range as the DIVAR IP, we recommend using

the Bosch VMS Configuration Client.

To assign device IP addresses:

1. On the Bosch VMS default screen, double-click the

Configuration Client icon

to change device network

settings. The application starts.

2. Enter the following, then click OK.

User name: admin

Password: no password required (if not set with the

wizard)

Connection: 127.0.0.1

3. On the Hardware menu, click Initial Device Scan.

3.5

30 en | System setup - first steps DIVAR IP 3000

2013.09 | V4 | DOC Bosch Sicherheitssysteme GmbH

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Sin comentarios

Bosch DIVAR AN 3000 Guía de instalación Pagina 30