Bosch DIVAR AN 3000 Guía de instalación descargar pdf (Pagina 31)

The application performs a network scan for all defaulted

devices.

4. To assign all devices at once, click Select All, then right-

click the selected devices, then click SetIP Addresses. The

Set IP Addresses dialog box is displayed.

Note:

It is also possible to configure the devices individually with

specific IP addresses based on MAC address.

5. Enter the starting IP address for the address range you

want to use, click the Calculate tab, then click OK.

6. To restart the devices, click OK.

7. Close Configuration Client .

To perform further functionalities refer to the Bosch VMS

manual. References to the manual are described in Additional

Documentation and client software, page 33.

Using Bosch VMS Operator Client

Use Bosch VMS Operator Client to verify the live, recording and

playback functionality of DIVAR IP.

To verify live image functionality in the Operator Client

1. On the Bosch VMS default screen, double-click the

Operator Client icon . The application starts.

2. Enter the following and click OK.

User name: admin

Password: no password required (if not set with the

wizard)

Connection: 127.0.0.1

3. Click the live image icon. The Logical Tree with the cameras

is displayed.

4. Select a camera and drag it to an image window. The image

of the camera is displayed if the camera is assigned

correctly.

3.6

DIVAR IP 3000 System setup - first steps | en 31

Bosch Sicherheitssysteme GmbH 2013.09 | V4 | DOC

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Sin comentarios

Bosch DIVAR AN 3000 Guía de instalación Pagina 31