Bosch D9210C Manual de usuario descargar pdf (Pagina 3)

substitution features and provides enhanced security

with encryption. The B420, DX4020 and ITS‑DX4020‑G

can all be used for remote programming.

GV4 is the first Security Control panel to support DNS

(Domain Name System) for both remote programming

and central station communication. DNS provides ease

of use, eliminating the need to use static IP addresses

as your reporting destination and accommodates a

simple solution for central station disaster recovery.

IP Setup is available via the installer keypad menus

and the remote programming software, eliminating the

need to use complicated internet programming tools

such as ARP and Telnet.

Communication Paths

D9412GV4 Control Panels accommodate up to four

separate destinations for primary, alternate, and

backup receivers for automatic test reports.

When resetting alarms or arming or disarming a

system, the user is identified by name and number.

Firmware Updates

Remote firmware updates using the RPS Firmware

Update wizard through the IP connection (B426/B420

Connetix Ethernet Communication Module) as well as

an on-site flash update key, provides for easy feature

enhancements without replacing ROM chips.

*For GV4 version 2.00 firmware update information,

refer to the, “GV4 version 2.00 firmware updates”

datasheet to learn more about key enhancements,

and supported products.

A wide variety of input options

Each point:

• Accommodates normally‑open (NO) and

normally‑closed (NC) devices with end‑of‑line (EOL)

resistor supervision.

• Is programmable for fire, fire supervisory, or intrusion

application.

• Can be hard-wired, addressable, or wireless.

Security and Fire Detection

The D9412GV4 Control Panel provides eight on‑board

points, and up to 238 additional off‑board points. You

can program individual points to monitor all types of

burglar alarms, fire alarms, and supervision devices.

Access Control

The D9412GV4 provides custom door strike, point

shunt and auto disarming response by area. There are

14 panel‑wide access levels with both manual and

scheduled control.

Store, view, or print access events such as:

• Access granted

• No entry

• Request to enter

• Request to exit

Wireless Interface

The B820 SDI2 Inovonics Interface Module connects

an Inovonics EN4200 Serial Receiver to the control

panel SDI2 bus, allowing this UL Listed wireless

system to be programmed locally via the panel keypad,

as well as remotely through RPS.

Event Log

The event log stores up to 1,000 local and transmitted

events. The event log includes time, date, event, area,

point, user number, and transmission status. View the

event log from a keypad or use RPS to remotely

retrieve event information. RPS operators can retrieve

events periodically using one call, rather than receiving

several calls each day. When the event log reaches a

programmed threshold of stored events, it can send an

optional report to a receiver.

Scheduled Events (SKEDS)

The internal clock and calendar start individually

scheduled events (SKEDS). SKEDS perform functions

such as arm or disarm, relay control, or point

bypassing. The D9412GV4 Control Panel offers:

• 40 scheduled events with up to 25 different functions

• Eight opening windows and eight closing windows

• Eight user windows

• Day-of-week, date-of-month, or holiday only schedules

• Four holiday schedules of 366 days each (leap year)

Fire Test

When a user activates Fire Test Mode, the control

panel suppresses all reports to the central station. The

keypad and annunciator show all testing data. An

automatic sensor reset feature saves time; you do not

need to reset the sensors manually. At the end of test,

the keypad shows the number of untested points.

Programming, Diagnostics and Controls

Installers can program locally or remotely through RPS

as well as basic keypad programming. A programmable

system passcode prevents unauthorized remote

programming.

Two Data Buses

GV4 provides 2 data buses which support a wide array

of components. The SDI bus supports keypads,

access, and communications modules and also allows

connection of existing components in a retrofit

application. The new SDI2 bus supports input and

output devices as well as a new wireless interface

module, and an Ethernet communicator. SDI2 allows

these devices to be mounted up to 1000 ft (305 m)

from the control panel, providing installation

convenience and flexibility.

Commercial Fire Alarm Support

Suitable for Commercial Fire (UL 864, 9

Edition)

applications.

Certifications and approvals

USA:

3 | D9412GV4 Series Control Panels

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Bosch D9210C Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Bosch D9210C