Bosch LTC 8714 Manual de usuario descargar pdf (Pagina 3)

Mechanical

Construction/

Finish

Surface mountable, flat black painted metal

enclosure

Dimensions

(W x D x H)

121 x 70 x 35 mm (4.75 x 2.75 x 1.375 in.)

Weight 170 g (6 oz.)

LTC 8568/00 Signal Distribution Unit

Main site Bi-Phase control code distribution and line

driver unit for communicating to AutoDome Series

cameras, receiver/drivers, switcher/ followers, and

Allegiant satellite systems. The unit provides 32

separate outputs for driving up to 256 remote devices.

Either “star” or “daisy chain” wiring configurations

may be used. Two meter (6 ft) interface cable for

data/power between unit and main Allegiant CPU bay

supplied. Not applicable to the LTC 8100, LTC 8200,

and the LTC 8300 Series systems.

Electrical

Operating Voltage 12 VAC (supplied by main CPU bay)

Power 3 W

Indicators

• Power LED

• Code LED

Connectors

Input One (1), 9-pin Sub D connector for data/power

Outputs Sixteen, 6-contact removable screw terminal

blocks for code output. Maximum transmission

distance is 1.5 km (5000 ft) using 1 mm

(18 AWG) shielded-twisted pair (Belden 8760 or

equivalent).

Mechanical

Construction/

Finish

Charcoal colored metal enclosure

Dimensions

(W x D x H)

445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.)

Integral mounting flanges for EIA 48 cm (19 in.)

rack

Weight 1.8 kg (4 lb)

LTC 8768/00 Signal Distribution Unit

Same features and specifications as the LTC 8568/00

except that it contains twice the number of output

connectors which provide 64 separate outputs for

driving up to 512 remote devices. Not applicable to

the LTC 8100, LTC 8200, and the LTC 8300 Series

systems.

LTC 8540/00 Alarm Interface Unit

Unit accepts up to 64 contact closures or logic level

inputs from remote sensing devices such as door

contacts, PIRs, etc. and then reports the “alarm”

information to the main Allegiant CPU bay. Alarm

inputs may be configured in groups of 32 to accept

either normally open or normally closed contacts. Unit

also contains eight relay outputs that activate

automatically upon alarm conditions. A two meter

(6 ft) interface cable for data/power between unit and

main CPU bay is supplied. Not applicable to the

LTC 8100, LTC 8200, and the LTC 8300 Series

systems.

Electrical

Operating Voltage 12 VAC or 12 VDC

(12 VAC is supplied by main CPU bay)

Power 8 W

Indicators

Power LED

Alarm LED; audible tone

Connectors

Alarm Inputs Sixty-four (64); twenty 6-contact removable

screw terminal blocks

Alarm Outputs Eight (8) relay outputs (100 VDC, 0.5 A, 10 W);

four (4), 6-contact removable screw terminal

block.

Data/Power One 9-pin Sub D connector

Mechanical

Construction/

Finish

Charcoal colored metal enclosure

Dimensions

(W x D x H)

445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.)

Integral mounting flanges for EIA 48 cm (19 in.)

rack

Weight 1.8 kg (4 lb)

AutoDome and AutoDome Easy IISeries

The AutoDome

and the AutoDome Easy II Series of

cameras integrates high-speed panning and tilting,

360-degree continuous rotation, pre-positions, etc. in

a small, easy-to-install lightweight package. These PTZ

models are available with various mounting and

configuration options for use in both internal and

external environments.

Refer to the AutoDome and the AutoDome Easy II

Series datasheets for complete specifications.

LTC 8560, LTC 8561, LTC 8562, LTC 8563, LTC 8564,

and LTC 8566 Series Receiver/Drivers

These series of on-site receiver/drivers are designed to

receive Bi-Phase control code and convert this data

into signals for controlling conventional pan/tilt, zoom

lenses, and auxiliary functions. Supplied in an

environmentally rated enclosure, these series of

receiver/drivers are available in both basic and full-

featured models. Refer to the chart below for specific

model selection based on desired operating voltages

and features:

| Accessory Packages for the Allegiant

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Bosch LTC 8714 Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8714