Bosch LTC 8714 Manual de usuario descargar pdf (Pagina 5)

Connectors

Inputs One (1), 3-pin removable screw terminal connector,

located on the rear panel; communication port where

Bi-Phase commands are received

Outputs Four (4), 12-pin removable screw terminal connectors

located on the rear panel; relay contact (0.5 A at

20 VAC/DC and a maximum resistive load of 10 VA)

36 peak volts from either pin of the relay to ground

AC Input 3-wire power cord with grounded plug; 1.8 m (6 ft)

long

Mechanical

Construction/

Finish

Steel chassis with sheet metal cover and

plastic bezel. Charcoal colored case.

Dimensions

(W x D x H)

223 x 280 x 40 mm

(8.77 x 11 x 1.59 in.)

Weight 1.9 kg (4.3 lb)

Optional Rack Mount Kit LTC 9101/00 (Holds 1 or 2 units)

LTC 8712 Series CONSOLE Port Expanders

The LTC 8712 Series “expands” an Allegiant system's

CONSOLE port to permit up to 4 external computing

devices to communicate with the system via RS-232

protocol. Any computing device that can normally

communicate directly with an Allegiant via its RS-232

CONSOLE port can be used with these port

expanders. The external devices can consist of PCs

running the Allegiant system's Master Control

Software package, the Allegiant Graphical User

Interface (GUI), access control systems, Allegiant

series RS-232 keyboards, or other devices utilizing the

Allegiant system's Command Console Language (CCL).

The LTC 8712 Series can be used with the LTC 8100,

LTC 8200, LTC 8300, LTC 8500, LTC 8600, LTC 8800,

or LTC 8900 Series systems containing CPU software

version 6.5 or higher.

Electrical

Model No. Rated Voltage Voltage Range Power

LTC 8712/60 120 VAC, 50/60 Hz 108 to 132 10 W

LTC 8712/50 230 VAC, 50/60 Hz 198 to 264 10 W

Indicators Power and data transmission activity displayed using

LEDs

Connectors

Inputs One (1), 9-pin Sub D connector; provides RS-232

interface to Allegiant bay. Two-meter (6-ft)

interconnect cable to main bay supplied

Outputs Four (4), 9-pin Sub D connectors for RS-232

interface to up to four external devices

AC Input 3-wire power cord with grounded plug; 1.8 m (6 ft)

long

Mechanical

Construction/

Finish

Steel chassis with sheet metal cover and

plastic bezel. Charcoal colored case.

Dimensions

(W x D x H)

223 x 280 x 40 mm

(8.77 x 11 x 1.59 in.)

Weight 1.9 kg (4.3 lb)

Optional Rack Mount Kit LTC 9101/00 (Holds 1 or 2 units)

LTC 8713 Series Alarm Port Expander

The LTC 8713 Series interfaces to a LTC 8500,

LTC 8600, LTC 8800, or LTC 8900 Series alarm port to

permit additional LTC 8540/00 Alarm Interface units to

be connected to the system. A single LTC 8713 series

alarm port expander supports up to four LTC 8540/00

alarm interface units. This provides the capability for

up to 256 alarm input points. Multiple LTC 8713 units

may be combined to provide up to 1024 alarm input

points using up to sixteen LTC 8540/00 units. The

actual number of units that can be used in a system

depends upon the model of the Allegiant system being

used. System interconnect cable is included. A

separate 12 VAC or DC, 8 W power supply is required

for each LTC 8540/00.

Alarm Capacities

Allegiant Model

No.

Maximum No.

of Alarms

Maximum No.

of LTC 8713

Maximum No.

LTC 8540/00

LTC 8500 128 1 2

LTC 8600 512 3 8

LTC 8800 1024 5 16

LTC 8900 1024 5 16

Electrical

Model No. Rated Voltage Voltage Range Power

LTC 8713/60 120 VAC,

50/60 Hz

108 to 132 10 W

LTC 8713/50 230 VAC,

50/60 Hz

198 to 264 10 W

Indicators Power and data transmission activity displayed using

LEDs.

Connectors

Inputs One (1), 9-pin Sub D connector; provides RS-232

interface to main Allegiant bay. Two-meter (6-ft)

interconnect cable to main bay supplied.

5 | Accessory Packages for the Allegiant

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Bosch LTC 8714 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8714