Bosch NTC-255-PI Manual de usuario descargar pdf (Pagina 18)

18 en | Installation IP Camera 200 Series

AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems

3.4 Power connection

The camera can accept power from both the DC12V power

input and the Ethernet input at the same time. You can remove

either one of the power sources without interrupting camera

operation.

3.4.1 DC power connection

Figure 3.3 DC power connection

Connect power from a 12 VDC class 2 power supply as follows:

1. Use AWG22 wire; cut back 5 mm (0.2 in) of insulation.

2. Remove the 2-pole connector from the camera cable tree.

3. Loosen the screws and insert the wires.

4. Tighten the screws and reconnect the 2-pole connector to

the power connector of the camera cable tree.

5 mm

(0.2 in)

12 VDC

22AWG

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Sin comentarios

Bosch NTC-255-PI Manual de usuario Pagina 18