Bosch VJR-A3-IC Instrucciones de operaciones descargar pdf (Pagina 10)

10 en | Installing a Recessed Mount AutoDome Junior

F.01U.201.538 | 1.0 | 2010.12 Mounting Guide Bosch Security Systems, Inc.

2. Drill or cut a 200 mm hole with a tolerance of 2.2 mm ( 7.9

in. ± 1/8).

3. Optional: if installing the AutoDome Junior to a suspended

ceiling tile or any other surface where additional support is

required, the VJR-A3-SP mounting kit is recommended

(supplied separately).

4. Ensure that the gasket is attached to the retaining ring. If

the gasket and the retaining ring are separate:

a. Locate the flat side of the gasket and the recessed

side of the retaining ring.

b. Thread the flat side of the gasket (item 1, below) onto

the recessed side of the retaining ring (item 2). The

illustration below shows a cross-section of the gasket

on the retaining ring.

CAUTION!

You must ensure that the gasket is attached to the retaining

ring as shown above to ensure an environmentally tight seal.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Sin comentarios

Bosch VJR-A3-IC Instrucciones de operaciones Pagina 10