Bosch VJR-A3-IC Instrucciones de operaciones descargar pdf (Pagina 15)

AutoDome Junior Installing a Recessed Mount | en 15

Bosch Security Systems, Inc. Mounting Guide F.01U.201.538 | 1.0 | 2010.12

3.1.3 Installing the Camera to the Mounting Plate

To install the base to a surface or suspended ceiling using the

supplied mounting plate, do the following:

1. Loosen the single safety locking screw on the base of the

unit using the user-supplied T-10 Torx wrench.

Figure 3.9 Unlock Safety Locking Screw

2. Remove the screw from the Earth ground ( )on the

inside of the VJR-A3-JW.

3. Attach a user-supplied ground wire to the Earth ground

( ) screw hole on the VJR-A3-JW and secure with the

screw.

4. Attach the green grounding wire from the unit to the

grounded ( ) screw hole on the VJR-A3-JW using the

attached captive screw washer.

5. Route wires through the knockout on the VJR-A3-JW.

NOTICE!

If you need to install the VJR-A3-SP Support Bracket, refer to

the guide included with the bracket. Once the bracket is

installed, continue with the next section.

CAUTION!

All wires for installation applications must be routed through a

grounded conduit.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Bosch VJR-A3-IC Instrucciones de operaciones Pagina 15