Bosch GWS 8-125 C (CE) Instrucciones de operaciones descargar pdf (Pagina 12)

English | 13

Bosch Power Tools 1 609 929 L33 | (24.7.08)

Vibration-dampening Auxiliary Handle

The vibration-dampening auxiliary handle reduc-

es the vibrations, making operation more com-

fortable and secure.

f Do not make any alterations to the auxiliary

handle.

Do not continue to use an auxiliary handle if it

is damaged.

Hand Guard

f For operations with the rubber sanding plate

16 or with the cup brush/wheel brush/flap

disc, always mount the hand guard 15.

The hand guard 15 is fastened with the auxiliary

handle 5.

Mounting the Grinding Tools

f Before any work on the machine itself, pull

the mains plug.

f Grinding and cutting discs become very hot

while working; do not touch until they have

cooled.

Clean the grinder spindle 6 and all parts to be

mounted.

For clamping and loosening the grinding tools,

lock the grinder spindle with the spindle lock

button 1.

f Actuate the spindle lock button only when

the grinder spindle is at a standstill. Other-

wise, the machine may become damaged.

Grinding/Cutting Disc

Pay attention to the dimensions of the grinding

tools. The mounting hole diameter must fit the

mounting flange without play. Do not use reduc-

ers or adapters.

When using diamond cutting discs, pay attention

that the direction-of-rotation arrow on the dia-

mond cutting disc and the direction of rotation of

the machine (see direction-of-rotation arrow on

the machine head) agree.

See graphics page for the mounting sequence.

To fasten the grinding/cutting disc, screw on the

clamping nut 11 and tighten with the two-pin

spanner; see Section “Quick-clamping Nut ”.

f After mounting the grinding tool and before

switching on, check that the grinding tool is

correctly mounted and that it can turn free-

ly. Make sure that the grinding tool does not

graze against the protection guard or other

parts.

Mounting flange for grinding

spindle M 14: An O-ring (plastic

part) is inserted in the mount-

ing flange 9 around the centring

collar. If the O-ring is missing

or is damaged, it must in all

cases be replaced (article

number 1 600 210 039) before

the mounting flange 9 is mounted.

Mounting flange for grinding spindle M 10: The

mounting flange can be used on both sides.

Flap Disc

f For operations with the flap disc, always

mount the hand guard 15.

Rubber Sanding Plate

f For operations with the rubber sanding plate

16, always mount the hand guard 15.

See graphics page for the mounting sequence.

Screw on the round nut 18 and tighten with the

two-pin spanner.

Cup Brush/Disc Brush

f For operations with the cup brush/wheel

brush, always mount the hand guard 15.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be

screwed onto the grinder spindle until it rests

firmly against the grinder spindle flange at the

end of the grinder spindle threads. Tighten the

cup brush/disc brush with an open-end spanner.

OBJ_DOKU-12526-003.fm Page 13 Thursday, July 24, 2008 1:38 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 123 124

Comentarios a estos manuales

Sin comentarios