Bosch DDC KIT Especificaciones descargar pdf (Pagina 6)

Robert Bosch LLC KTS 570 Quick Start Guide | F00E900073 | Version 1 | August 2007

KTS 570 Quick Start Guide | F00E900073 | Version 1 | August 2007 Robert Bosch LLC

Click Next to start the Bluetooth® Stack installation.

Click Yes to start the Install process.

Plug The KTS Bluetooth® Dongle into the USB port at

this time. Click OK to continue.

13.

14.

15.

Click Yes to restart the computer.

After the system reboots you should have the

Bluetooth® Manager Icon displayed on your desktop.

Go to the Control Panel and double click the Bosch

DDC Control Panel Icon.

Click the New button to add the new Bluetooth®

connection.

16.

17.

18.

19.

Note

Leave the Bluetooth® dongle plugged into the

USB Port

Note

This icon will only be displayed when the

Bluetooth® dongle is plugged in.

Click Yes to install the Bluetooth® link.

The Bluetooth® device will now assign a Bluetooth®

address to the KTS 570 through the USB cable.

Remove the USB cable from the KTS 570 Module. Click

OK.

20.

21.

22.

The KTS 570 Bluetooth® activation process will now be

completed.

Click Accept and then OK to complete the installation.

Congratulations, you have successfully set up the wireless

Bluetooth® installation.

Firmware Update

If your KTS 570 was not connected to the PC during

software and rmware installation you will need to do a

Firmware Update as described below.

Connect the KTS 570 with the PC via USB and supply

external power to the KTS. Verify power with blinking

green light on end of unit. Firmware Update will not

work wirelessly – unit must be connected via USB.

23.

24.

Note

Conrm that the USB cable is still plugged into

the KTS 570.

KTS 570 | Firmware Update | 9 | KTS 570 | Bluetooth Installation

1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios

Bosch DDC KIT Especificaciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para No Bosch DDC KIT