Bosch DiBos Micro Guía de instalación descargar pdf (Pagina 70)

70 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

Pre-alarm time [sec.]: Select the pre-alarm time for the alarm and motion

recording.

Note:

The maximum pre-alarm time is 1800 seconds. The pre-

alarm time depends on the recording rate of the MPEG4

device's pre-alarm recording. A maximum of 3600 images

can be recorded for each pre-alarm and by each camera.

5 Alarm recording Make the settings for alarm recording.

Stream Select the stream for the MPEG4 device (Stream 1 or

Stream 2).

Audio Activate this check box if audio is also to be recorded.

Post-alarm time [secs.]: Enter the post-alarm time.

Note:

The maximum post-alarm time is 999 seconds. The default

setting is 0 seconds.

6 Continuous recording Make the settings for continuous recording.

Stream Select the stream for the MPEG4 device (Stream 1 or

Stream 2).

Audio Activate this check box if audio is also to be recorded.

7 Delete old video Activate this check box to automatically delete data after a

specified number of days.

Older than [days]: Enter the number of days after which data should be

deleted.

Example: 3 means that all data older than 3 days is

automatically deleted.

Delete protected data: Check box is activated: Protected data is automatically

deleted after a specified number of days.

Check box is not activated: protected data is not

automatically deleted.

8 Default settings Click the button to see the default settings.

9 Copy settings to other

time periods...

Copies all tabs from the selected time period with all the

settings they contain into other time periods.

Click the button. A dialog box opens where you can select

the time periods.

10 Save The entries are saved.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 157 158

Sin comentarios

Bosch DiBos Micro Guía de instalación Pagina 70