Bosch DiBos Micro Guía de instalación descargar pdf (Pagina 82)

82 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

6.5.7 Configuring AP Inputs

Inputs and outputs menu > AP inputs tab

If an AP is connected serially, a maximum of 32 inputs that can cause triggering of an alarm in

the system can be specified.

As standard, every input has line statuses assigned that can be modified in LSN alarm panels

for the specific project. In addition, AP addresses can be assigned to each input.

1 AP inputs Click the tab.

2 Connection settings

Interface: Select the interface.

Baud rate: Select the Baud rate.

AP type: Select the AP type.

3 Type Click the down arrow in the column and select the

type of input.

The input type, e.g. holdup, is activated.

The input type is not activated.

Note:

Each input has specific types of line statuses

assigned as standard. This assignment can be

changed for LSN alarm panels.

4 Name Place the cursor in the column and enter the name.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 157 158

Sin comentarios

Bosch DiBos Micro Guía de instalación Pagina 82