Bosch DiBos Micro Guía de instalación descargar pdf (Pagina 88)

88 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

6.5.9 Configuring ATM/POS Inputs

Inputs and outputs menu > ATM/POS- Inputs tab

The ATM/POS-Bridge is used to connect cashpoint systems and ATMs. The video system can

be connected to a maximum of 8 ATM/POS-Bridges, each with 4 ATMs. The video is connected

via the IP network (LAN).

1 ATM/POS inputs Click the tab.

2 Devices: Select the device.

3 IP address: Enter the IP address of the ATM/POS-Bridge.

4 Devices port number: Enter the port number of the ATM/POS-Bridge.

5 Port number: Enter the DiBos port number.

6 Data structure: Shows the structure of the data stream that is sent to

DiBos by theATM/POS-Bridge. It is possible to have a

maximum of 10 data fields as distinguishing factors.

The size of the data stream is limited to 7 kilobytes.

Note:

Each of the individual data fields can be activated by

selecting the relevant check box. If none of the check

boxes are selected, the entire data stream is written

in the first data field.

7 Edit Click the button. A dialog box opens in which you can

configure the type of data field and the corresponding

start and end position in the data stream.

Note:

Mark in advance the rows to be processed under

Data structure.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 157 158

Sin comentarios

Bosch DiBos Micro Guía de instalación Pagina 88