Bosch PIL975L34E Manual de instrucciones Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 24
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
16
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Turning on and off the childproof lock.
The hob should be switched off.
To turn on: press and hold the
>D symbol for approx.
4 seconds. The
D symbol lights up for 4 seconds. The hob is
locked.
To turn off: press and hold the
>D symbol for approx.
4 seconds. The lock is now deactivated.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the “Basic Settings" section.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than power level 9.
Restrictions when using
This function is available on all hotplates, provided that no other
hotplate in the same group is switched on, (see diagram).
Otherwise,
G and 9.0 will flash on the selected hotplate display
and the power setting will then be automatically set to 9.0.
In group 2, the powerboost function can be activated at the
same time on all hotplates. (see diagram)
To activate
1.Select the required hotplate using the corresponding
symbol
.
2.Press the G symbol. The function has been turned on.
To deactivate
Select the hotplate by pressing the corresponding symbol
and then press the
G symbol.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
How to program
Enter the time period for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
The hob must be switched on.
1.Select the required hotplate and power level.
2.Press the 0 symbol twice. The 0 .0, min and q indicators
light up on the display for the selected hotplate.
If you press the
° symbol, instructions on how to select the
time will appear on the display.
3.Within the next 10 seconds, set the time using
the 0 to 9 symbols or with the + and - symbols. Then press
the
0 symbol to activate the function.
+ symbol: 30 minutes
- symbol: 10 minutes
After a few seconds, the cooking time begins to count down.
The cooking time for the selected cooking zone will be shown
on the display.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios