Bosch PIL975L34E Manual de instrucciones descargar pdf (Pagina 17)

Once the time has elapsed

The hotplate switches off once this time has elapsed. A beep

sounds and 0.0 appears on the hotplate and 00 appears on

the time program function display for 10 seconds.

When the

0 symbol is pressed, the display turns off and the

beep ends.

Changing or cancelling the time

Select the hotplate and then press the

0 symbol twice.

Change the time using the 0 to 9 symbols or with the + and -

symbols. To cancel the time, programme to zero with the 0 or -

symbol until 00 appears.

Automatically switch off a hotplate with the cooking sensor

function activated

When cooking using the cooking sensor system, the

programmed cooking time begins to count down once the

hotplate reaches the desired temperature.

Cancelling the time for a hotplate using the frying sensor

function

When cooking using the frying sensor, the programmed

cooking time starts to count down once the cooking zone has

reached the required temperature.

Notes

■ Select a hotplate to check the remaining cooking time.

■ Any cooking time can be programmed for up to 99 minutes.

■ When the ° symbol is pressed and the time has not been set,

an alert will appear on the display.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

The hob must be switched on.

1. Press the 0 symbol. U, and 00:00 appear on the time

program function display.

2. Set the required time with the 0 to 9 symbols or with

the + and - symbols. On the display, the setting will be

programmed from right to left.

+ symbol: 10 minutes

- symbol: 5 minutes

The cooking time begins to count down after a few seconds.

Once the time has elapsed

Once the time has elapsed a beep will sound. 00:00 appears

in the time program function display. When the

0 symbol is

pressed, the displays turn off and the beep goes off.

Changing or cancelling the time

Press the

0 symbol. Change the time by pressing the 0 to 9

symbols or + and - symbols. To cancel the time, programme it

to 0 with the 0 to 9 symbols or with the + and - symbols.

Note: When the

° symbol is pressed and the time has not been

set, an alert will appear on the display.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. F8 and the residual heat

indicator

qH/ph flash alternately on the hotplate display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Cleaning lock

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

>D symbol. An alert will appear on the display. The

control panel is locked for 20 seconds. The surface of the

control panel can now be cleaned without risk of changing the

settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Bosch PIL975L34E Manual de instrucciones Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Bosch PIL975L34E