Bosch D720 Guía de instalación descargar pdf (Pagina 55)

D9412GV3/D7412GV3 | Operation and Installation Guide | 10.0 Off-Board Relays

Bosch Security Systems, Inc. | 2/10 | F01U143070-01 55

10.2.2 Installation

Install the D811 in the enclosure with the control

panel (Figure 25) or in an adjacent enclosure no more

than

1.5 m (5 ft.) from the control panel. Use 1.5 mm

(16 AWG) to 0.8 mm (22 AWG) wire.

To install D811 Modules in the enclosure with the

control panel:

1. Align the D811 Module with any of the four

mounting locations in the enclosure (Figure 2 on

page 16).

2. Using the screws provided with the module,

secure it in the enclosure.

Use the D137 Mounting Bracket or D9002

Mounting Skirt to install D811 Modules in

enclosures with no available module mounting

locations.

10.2.3 Wiring Connections

Power down the control panel to connect D811

Modules as shown in Figure 25 on this page and

Figure 26 on page 56.

The D811 for Relay 53 connects to

Zonex 1.

The D811 for Relay 117 connects to

Zonex 2 on the D9412GV3.

Figure 25: D811 Module Wiring to the D9412GV3

GND

AUX

DATA

GN D

AUX

DATA

21 22

R eset Pin

Disable all except Battery

Charging and Progr amming

PERIPHE RAL DEVICE CO NNE CTIONS

RED POWER +

YELLOW

DATA BUS A

GREE N DATA BUS B

BLACK COMM ON

ZONEX OUT 1

ZONEX IN 1

N.F.P.A.

Style 4.0

Signaling

Line

Circu its

ZONEX POWER +

ZONEX COMMON

ZONEX OUT 2

ZONEX IN 2

Op era t i on Monitor LED

Pulses when Norm al

Flickers when Rin ging

GRE EN

D5200/D5360

PROG CONN

Point 8 , S3 Option

Closed = 1 k

EOL

Norm al Operation

Op en =A B - 12 UL

Bell Bo x 220 k

1 - D811 for Relay 53

2- D811 for Relay 117

3- On-board points

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 75 76

Comentarios a estos manuales

Sin comentarios

Bosch D720 Guía de instalación Pagina 55

Comentarios a estos manuales

Relacionado con productos y manuales para Teclados numéricos Bosch D720