Bosch B450 Especificaciones descargar pdf (Pagina 21)

Table 5.1: B450 networking parameters configurable in RPS

Notice!

If you are using a GV4 version 1.00 control panel, select “B420 Ethernet Communicator”

within RPS. If you are using a GV4 v2.00 control panel or higher, or a B Series control panel,

select ”B426 Ethernet Communicator” within RPS.

Information about the B450 such as it's Status, IP Address, Bus Voltage and the assigned

phone number of the plug-in module can be found on the RPS Diagnostics screen for the B42X

module per figure 5.2. The plug-in communicator's phone number is displayed in the

"Hostname" field. Refer to the illustration below.

Figure 5.3: B450 status shown as Ethernet Communicator in RPS Diagnostics with GV4 version 1.00

Conettix Plug-in Communicator

Interface

Configuration | en 21

Bosch Security Systems, Inc. Installation and Operation Guide 2013.09 | 02 | F.01U.282.875

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Sin comentarios

Bosch B450 Especificaciones Pagina 21