Bosch B450 Especificaciones descargar pdf (Pagina 41)

SMS configuring LEDs

Condition B450

Heartbeat

B450 Transmit

(TX)

B450 Receive

(RX)

Plug-in module

status

Invalid SMS message

received

1 sec flash The Transmit (TX) and Receive (RX)

LEDs will alternate flashing at 1/2

second interval

1 sec flash

SMS configuration

complete

1 sec flash The Transmit (TX) and Receive (RX)

LEDs will flash in unison at a 1

second interval

1 sec flash

Show the firmware version

To show the firmware version using an LED flash pattern:

– the optional tamper switch is installed:

With the enclosure door open, activate the tamper switch.

– If the optional tamper switch is NOT installed:

Momentarily short the tamper pins.

When the tamper switch is activated (open to closed), the heartbeat LED stays OFF for 3 sec

before indicating the firmware version. The LED pulses the major, minor, and micro digits of

the firmware version, with a 1 sec pause after each digit.

The following is an example: The version 1.4.3 would be shown as LED flashes:

[3 second pause] *__****__*** [3 second pause, then normal operation].

Figure 6.1: Firmware LED flash patterns example

Diagnostic log

The Diagnostic Log option is used in the event of an intermittent service outage, or

communication error, in which a diagnostic log can be generated from the B450 menu options.

The generated diagnostic log file is used by TECHNICAL SUPPORT to determine how often a

persistent problem occurs, as well as detailed network configuration settings associated to

the module during the time of the reported problem.

Generate the diagnostic log only when directed by TECHNICAL SUPPORT.

Understanding network polling

Plan carefully when programming the control panel poll time, ACK wait times, retries, and

D6x00 Receiver poll and supervision time. Having the wrong or improper control panel

settings could cause trouble conditions when the network carrier performs maintenance, and

increased data volumes that could effect your monthly cost. Your settings for these

parameters determine how the system works, but depend on the security level needed.

For more information regarding proper data plans and installation parameters related to

network polling, refer to Bosch Cellular Service User Guide (P/N: F01U273558).

6.2

6.3

6.4

Conettix Plug-in Communicator

Interface

Maintenance and troubleshooting | en 41

Bosch Security Systems, Inc. Installation and Operation Guide 2013.09 | 02 | F.01U.282.875

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Bosch B450 Especificaciones Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch B450