Bosch ICP-CC404 Guía de usuario descargar pdf (Pagina 15)

ICP-CC404 | User's Guide | 21.0 Basic Pager Reporting

Bosch Security Systems, Inc. | 12/08 | F01U089400-02 15

Table 12: Zone Status Display Descriptions

Display Zone Description

0 Normal. The corresponding zone is sealed.

1 Alarm. The corresponding zone is unsealed

and in alarm.

2 Bypassed. A system operator manually

isolated the corresponding zone. Refer to

Section 9.0 Isolating Zones for information

about manually isolating a zone(s) before

arming the system.

3 Trouble. A zone was unsealed when Exit Time

expired.

System Status

The system status information is divided into the four

digits identified in Table 13.

Table 13: System Status

Digit Description

First 8 = the system is disarmed

9 = the system is armed

Second Identifies the codepad alarm activated by the

operator:

0 = No Codepad Alarm

1 = Codepad Panic or Duress Alarm

2 = Codepad Fire Alarm

3 = Codepad Medical Alarm

Third 0 = AC Supply is normal

1 = AC Supply failed

Fourth 0 = System Normal – There are no faults.

1 = System Fault – The control panel

registered a fault.

Figure 6 on page 16 shows a transmission from a

control panel with an ID number of 678, and Zone 2

in alarm. Figure 6 on page 16 also shows Zone 3 is

manually isolated and the system is armed.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

Bosch ICP-CC404 Guía de usuario Pagina 15