Bosch K2200 Series Especificaciones descargar pdf (Pagina 11)

K2200 DOOR CONTROLLER SERIES

(CONTINUED)

Toll Free Customer Service: 1-800-414-3038

Customer Service FAX: 1-800-414-3039

Readers

The door controllers can connect two K2000-Series and K3000-Series

readers or one Wiegand reader to each reader channel. A K2012 Wiegand

Interface is not required to use most 26-bit Wiegand devices. K2012

Wiegand Interfaces are required for connecting two 26-bit Wiegand

format readers to a single door channel, or when using a Wiegand device

with a K2015A Alarm Event Manager (AEM) on the same reader channel.

Alarm Monitoring

Add up to four K2015A or K2015B AEMs to a door controller. This allows

users to monitor extra inputs and to control outputs. All alarms can

immediately pass back to the system’s master or central point. If the door

controllers are connected remotely over a telephone line or TCP/IP,

configure the door controllers to automatically dial up the PC

administration system and inform the system of any alarms.

Serial Output

An RS-232 output is provided. When a printer uses the serial port, the

printer can print events from a stand-alone system. In a local or remote

master configuration, the serial port is used for communications.

Certifications and Approvals

Door Controller Approvals

K2200-LF UL 294, Access Control System Units

UL Canada

Installation/Configuration Notes

Compatibility Information

Alarm Event Managers K2015A and K2015B

Credentials K2000 PAC Series and KeyPAC 3000 Series

Wiegand Interface K2012

Readers Readykey/PAC, KeyPAC, and 26-bit Wiegand

Note: Use the K2108 Faceplate with K2000 Series

credentials and the K3108 Faceplate with

K3000 Series credentials

Technical Specifications

Cardholders

Standard Memory Module:

PC based administration:

up to 10,000

Stand-alone faceplate

administration: up to 4,000

Optional K2205-50K Cardholder

Upgrade Module

(Standard on K2200IP-LF)

PAC for Windows systems:

up to 18,000

Stanley PAC and PAC Vision

systems: up to 50,000

Technical Specifications

Controller

Dimensions:

10 in. x 15 in. x 3.5 in.

(25 cm x 38 cm x 9 cm)

Weight: 6.2 lb (2.8 kg)

Enclosure

Dimensions:

16 in. x 16 in. x 3.5 in.

(41 cm x 41 cm x 9 cm)

Environmental Considerations

Relative Humidity: 0% to 90%, non-condensing

Temperature (Operating):

+32°F to +104°F

(0°C to +40°C)

Power Requirements

Voltage (Output):

12 VDC at 2 A switchable to

24 VDC at 1 A for each lock

Power Supply:

110 V to 120 V or 220 V to 240 V

50 Hz or 60 Hz

Network Interface (K2200IP): RJ45 (10Base-T) EtherNet

Ordering Information

Description

Legacy

Part #

ADI Part #

K2200-LF Door Controller (Four-door)

No keypad or faceplate. Monitors four doors and

eight Readykey or Readykey KeyPAC readers.

Operates as a stand-alone, local, remote master,

or slave unit.

K2200-LF 7S-K2200LF

K2200IP-LF Door Controller (Four-door)

No keypad or faceplate. Monitors four doors and

eight K2000/K3000 Readers.

K2200IP-LF 7S-K2200IP

K1200-LF Door Controller (Two-door)

No keypad or faceplate. Monitors two doors and

four K2000/K3000 readers. Controls up to four

AEMs, such as the K2015B. Operates as a stand-

alone, local, remote master, or slave unit.

K1200-KF 7S-K1200KF

K1200IP-LF Door Controller (Two-door)

No keypad or faceplate. Monitors two doors and

four K2000/K3000 readers.

K1200IP-LF 7S-K1200IP

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comentarios a estos manuales

Sin comentarios

Bosch K2200 Series Especificaciones Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch K2200 Series