
K3002/D8302 VANDAL RESISTANT READER
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
27
The K3002 (D8302) Series of proximity reader is vandal-resistant and
made from durable, 14 gauge (1.9 mm), stainless steel. When you install a
K3002 Reader, you can surface mount it with tamper resistant screws.
Each reader serves one access point.
Features
Vandal-resistant material
Five programmable output formats (Readykey keyPAC (default),
Wiegand 26-bit, Wiegand 34-bit, magnetic stripe, or barcode)
LED indicator
Suitable for interior or exterior installations
K3002-Series reads K3000-Series credentials
D8302 requires D8338 or D8339 credentials
Certifications and Approvals
UL Standards UL 294, Access Control System Units
Approvals CE, FCC: Part 15
Ratings IP 66
Connection Considerations
Use a six-wire cable for applications with a door contact and a
request-to-exit device.
K3002 - If you use 18 AWG (1.2 mm) wire, you can place the reader up
to 3000 ft (914 m) away from the door controller.
D8302 - If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 500 ft (152 m) away from the door controller or control panel
Compatibility information
Systems KeyPAC K2100/K2200 and PAC512-Series Door Controllers
Bosch D9412G Control Panel
Bosch D7412G Control Panel
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm)
four-conductor cable
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed appli-
cations, 0% to 85%, non-condensing
Temperature (Operating): -31°F to +140°F (-35°C to +60°C)
Indicators One LED that emits red or green light
Power Requirements
Current (Maximum): 85 mA
Voltage (Input): 12 VDC nominal supplied by the door controller
Voltage (Operating): 10 VDC to 18 VDC at the reader
Read Range Up to 0.5 in. (1.2 cm)
Reader Dimensions 4 in. x 4 in. x 0.5 in. (10.1 cm x 10.1 cm x 1.2 cm)
Ordering Information
K3002/D8302 Vandal-resistant Proximity Reader
Stainless steel
K3002
D8302
7S-K3002
Comentarios a estos manuales