Bosch Solution 144 Guía de usuario Pagina 17
- Pagina / 44
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
17Bosch Security Systems 04/12 BLCC600U
Solution 144 User Guide
A1 Main Ofce
A2 Production
A3 Warehouse
Press
OK or MENU
2. Use the [] and [] keys to select the area that you
want to view the status information, then press
[OK] to select. Alternatively, you can enter the area
number, then press [OK]. The keypad will display
the area status information.
Main Ofce A1
Disarmed
Press OK or MENU
If the area is turned All On, the keypad will display
the following. Note in this example 1 zone has been
bypassed.
Main Ofce A1
Armed All On
001 Zones Bypassed
Press OK or MENU
If the area is turned Part On, the keypad will display:
Main Ofce A1
Armed Part On
Press OK or MENU
3. To exit, press [OK].
Areas > Commands >
Turn Area On/O
MENU 2-0-1
This menu allows you to turn an area All On or o.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [0] + [1].
A list of dierent areas will display on the keypad.
A1 Reception Area
A2 Sales Dept
A3 Administration Dept
Press
OK or MENU
If an area has already been turned All On or Part On,
a ‘tick’ () will be displayed on the right side of the
name description (see A2 Sales Dept above).
2. Use the [] and [] keys to select the area that you
want to turn on or o, then press [OK] to select.
Alternatively, you can enter the area number you
want to turn on or o, then press [OK].
Areas > Commands >
Turn All Areas On
MENU 2-0-2
This menu allows you to turn on all areas that your PIN
has been assigned to at the same time All On. The keypad
display below shows the area icons 1 through to 8.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [0] + [2].
The keypad will display the exit time bar to prompt
you to exit all areas. You should leave all areas now.
Area 1 Name
EXIT
NOW
When exit time has expired, the keypad will display
that all areas are turned All On (Armed).
Area 1 Name
ARMED
Fri,Aug,13 5:34 pm
i
Note
Area icons will only display if programmed to
do so by your security installer.
Areas > Commands >
Turn All Areas O
MENU 2-0-3
This menu allows you to turn o all areas that your PIN has
been assigned to at the same time. However, this menu
requires at least one area that has a keypad assigned to it to
be disarmed before you can access this command.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [0] + [3].
Areas > Commands >
Move To Area
MENU 2-0-4
This menu allows you to operate multiple areas from the
same keypad when the system has been partitioned.
Before operating a dierent area, you will need to move
the keypad to the area that you want to operate.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [0] + [4].
A list of dierent areas will display on the keypad.
- Solution 144 1
- TELEPERMIT 2
- Contents 3
- Program Menu Tree 4
- Introduction 5
- Features 5
- User’s Guide 5
- Status Icons / LED’s 7
- Keypad Tones 7
- Basic System Operation 8
- Turning An Area All On 8
- Turning The System Off 8
- Duress or Silent Alarms 10
- System Programming 10
- Erase User 10
- PIN Numbers 11
- Change Own PIN 11
- Change Other PIN 11
- Delete Token 12
- Token Status 12
- Delete PIN 12
- Add Token 12
- Edit Token 13
- RF Keyfob 13
- Add Keyfob 13
- Delete Keyfob 13
- User Name 13
- Area Assignment 14
- User Options 14
- TimeZones 14
- TimeZone Access 14
- Door Assignment 15
- User Expire Date 15
- Fingerprints 15
- Add Fingerprint 16
- Delete Fingerprint 16
- Fingerprint Status 16
- Area Status 16
- Area 1 Name 17
- Fri,Aug,13 5:34 pm 17
- Chime On/O 18
- Chime Mode 18
- Area Name 18
- Part Mode 1 Name 19
- Part Mode 2 Name 19
- Auto Arming 19
- Exit Time 20
- Reception Area 20
- Entry Time 1 20
- Entry Time 2 20
- Solution 144 User Guide 21
- OK or MENU 21
- Set Chime Zones 22
- Set Part 2 Zones 22
- OK to SAVE 23
- Output Status 24
- Turn Output On/O 24
- Output Array 25
- Door Status 25
- Door Array 25
- Door Override 26
- Output Name 26
- Door Name 26
- External Siren Test 27
- Internal Siren Test 27
- Strobe Test 27
- Communication / Reporting 27
- User Guide 28
- Destination 2 29
- Call Forward On 29
- Call Forward O 30
- User RAS PIN 30
- Email Reporting 30
- Email Address 30
- Email Options 31
- Send Test Report 31
- Devices and Optional Modules 31
- Device Status 31
- Contrast 32
- Backlight 32
- Trigger Table 1 32
- Trigger Table 2 33
- SMS Control 33
- System Events 34
- Panel Status 34
- System Trouble 34
- History Log 36
- Set Date & Time 36
- Start / Stop Day 38
- Keypad Hi/Lo Temp 39
- Site Name 39
- Walk Test All Zones 39
- Battery Test 40
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch Solution 144
(7 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.026 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales