Bosch Solution 144 Guía de usuario Pagina 37
- Pagina / 44
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
37Bosch Security Systems 04/12 BLCC600U
Solution 144 User Guide
System > Siren >
Volume
MENU 7-4-2
This menu allows you to program the volume level of the
arm / disarm beeps which are heard from the siren when
the system is armed and disarmed using a radio keyfob.
1. Press [MENU] + [7] + [4] + [2]. The keypad will display
the current siren volume (default = 15).
Volume
15
Press 0-9 OK to SAVE
2. Using the numeric keys, enter the new volume level.
Valid entries are 0 to 15 where 15 = the loudest
volume and 0 = no speeker beeps.
3. Press [OK] to save and exit or press [MENU] to exit
without saving.
i
Note
Only outputs programmed as horn speaker with beeps
will be eected by this menu option. This option will not
eect the volume of the siren when an alarm is triggered.
TimeZones
TimeZones may have been congured by your installer
during the installation of your system. These may be used
to automatically operate outputs or perform other system
functions at particular times of the day or days of the week
etc. They can also be used to restrict a particular user from
accessing the system at certain times of the day or days of
the week.
The following options allow you to vary or change the
times at which the timezone operates. There are up to 16
dierent timezones available on the system and each one
can have up to 4 separate start and stop times if required.
Your installer will advise you on the exact conguration
and function of the timezones in your system. In general
you should not need to change these once they have been
congured.
TimeZone 1 is defaulted to be a 24 hour timezone and it
cannot be changed.
System > TimeZones >
Name
MENU 7-5-0
This menu allows you to program 20 characters of text for
each timezone name.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [5] + [0].
A list of timezones will display on the keypad.
Tz1 24 Hour TimeZone
Tz2 TimeZone 2 Name
Tz3 TimeZone 3 Name
Press
OK or MENU
2. Use the [] and [] keys to select the timezone name
that you want to change, then press [OK] to select.
Alternatively, you can enter the timezone number,
then press [OK].
The keypad will display the following:
Name Tz2
TimeZone 2 Name
Press
OK to SAVE
3. To program the timezone name, use the [] and []
keys to scroll the cursor left and right across the user
name text. Use the [] and [] keys to scroll through
the dierent characters available. To clear all text
from the cursor position to the right, press the [OFF]
key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > TimeZones >
Time
MENU 7-5-1
This menu allows you to program the start time and stop
time of each timezone in 24Hr format HH:MM:SS. Up to 4
dierent periods are available for each timezone.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [6] + [2].
A list of timezones will display on the keypad.
Tz1 24 Hour TimeZone
Tz2 TimeZone 2 Name
Tz3 TimeZone 3 Name
Press
OK or MENU
2. Use the [] and [] keys to select the timezone
that you want to change, then press [OK] to select.
Alternatively, you can enter the schedule number,
then press [OK].
The keypad will display the following:
Period 1
Period 2
Period 3
Press
OK or MENU
3. Use the [] and [] keys to select the period in the
timezone that you want to change, then press [OK]
to select.
The keypad will display the following:
Time Tz2 Period 1
Start Time Stop Time
--:--:-- --:--:--
Press
OK to SAVE
4. Enter the new start and stop times in 24-hour format
(00:00:00 to 23:59:59 hours).
- Solution 144 1
- TELEPERMIT 2
- Contents 3
- Program Menu Tree 4
- Introduction 5
- Features 5
- User’s Guide 5
- Status Icons / LED’s 7
- Keypad Tones 7
- Basic System Operation 8
- Turning An Area All On 8
- Turning The System Off 8
- Duress or Silent Alarms 10
- System Programming 10
- Erase User 10
- PIN Numbers 11
- Change Own PIN 11
- Change Other PIN 11
- Delete Token 12
- Token Status 12
- Delete PIN 12
- Add Token 12
- Edit Token 13
- RF Keyfob 13
- Add Keyfob 13
- Delete Keyfob 13
- User Name 13
- Area Assignment 14
- User Options 14
- TimeZones 14
- TimeZone Access 14
- Door Assignment 15
- User Expire Date 15
- Fingerprints 15
- Add Fingerprint 16
- Delete Fingerprint 16
- Fingerprint Status 16
- Area Status 16
- Area 1 Name 17
- Fri,Aug,13 5:34 pm 17
- Chime On/O 18
- Chime Mode 18
- Area Name 18
- Part Mode 1 Name 19
- Part Mode 2 Name 19
- Auto Arming 19
- Exit Time 20
- Reception Area 20
- Entry Time 1 20
- Entry Time 2 20
- Solution 144 User Guide 21
- OK or MENU 21
- Set Chime Zones 22
- Set Part 2 Zones 22
- OK to SAVE 23
- Output Status 24
- Turn Output On/O 24
- Output Array 25
- Door Status 25
- Door Array 25
- Door Override 26
- Output Name 26
- Door Name 26
- External Siren Test 27
- Internal Siren Test 27
- Strobe Test 27
- Communication / Reporting 27
- User Guide 28
- Destination 2 29
- Call Forward On 29
- Call Forward O 30
- User RAS PIN 30
- Email Reporting 30
- Email Address 30
- Email Options 31
- Send Test Report 31
- Devices and Optional Modules 31
- Device Status 31
- Contrast 32
- Backlight 32
- Trigger Table 1 32
- Trigger Table 2 33
- SMS Control 33
- System Events 34
- Panel Status 34
- System Trouble 34
- History Log 36
- Set Date & Time 36
- Start / Stop Day 38
- Keypad Hi/Lo Temp 39
- Site Name 39
- Walk Test All Zones 39
- Battery Test 40
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch Solution 144
(7 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.019 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales