Bosch PXX875D34E Manual de instrucciones descargar pdf (Pagina 33)

Cooking assist functions en

Preparing and maintaining the wireless

temperature sensor

This section provides information on:

■ Adhering the silicone patch

■ Attaching the wireless cooking sensor

■ Cleaning

■ Changing the battery

The silicone patch and the cooking sensor can be

purchased at a later time from specialist retailers, our

technical after-sales service or our official website. To

do this, quote the relevant reference number:

Adhering the silicone patch

The silicone patch attaches the temperature sensor to

the cookware.

When a pan is used for the first time with the cooking

functions, the silicone patch must be adhered directly to

the pan. It is important

1. that the adhesive area on the pan is free from

grease. Clean the pan, dry it thoroughly and wipe the

adhesive area with a spirit.

2. Remove the protective film from the silicone patch.

Adhere the silicone patch to the outside of the pan in

the correct place using the enclosed template as a

guide.

3. Press down all over the surface of the silicone patch,

including in the centre.

The adhesive requires one hour to fully harden. Do not

use or clean the pan during this time.

Notes

■ Do not leave the pan with the silicone patch to soak

soapy water for long periods of time.

■ If the silicone patch comes off, attach a new one.

Fitting the wireless temperature sensor

Attach the temperature sensor to the silicone patch and

align it correctly.

Notes

■ Make sure that the silicone path is completely dry

before attaching the temperature sensor.

■ Position the cookware in such a way that the

temperature sensor is pointing towards the outer

side of the hob.

■ To prevent overheating, the temperature sensor

must not be pointed towards another item of

cookware that is hot.

■ Remove the temperature sensor from the saucepan

after cooking. Store it in a clean, safe place away

from sources of heat.

Cleaning

Do not clean the wireless temperature sensor in the

dishwasher.

You can find information on cleaning the temperature

sensor in the section on ~ "Cleaning"

Changing the battery

Changi ng the bat t er y

If the temperature sensor does not light up when the

symbol is pressed, the battery is flat.

Changing the battery:

1. Remove the silicone cover from the lower section of

the temperature sensor housing and remove both

screws using a screwdriver.

00577921 Set of 5 silicone patches

HEZ39050 Cooking sensor and set of 5 silicone patches

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Comentarios a estos manuales

Sin comentarios

Bosch PXX875D34E Manual de instrucciones Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Bosch PXX875D34E